(954) 718-3094 Request an estimate

Broward County, Florida

Impact Windows and Doors in Broward County

Hurricane-rated windows and doors set into properly repaired concrete openings.

In short

Who handles impact windows and doors in Broward?

SERPE-CO supplies and installs impact windows and doors in Broward County for condo and commercial buildings. We measure every opening, file the city permit with HVHZ product approvals, pull the old frames, repair the concrete and stucco around them, and anchor each unit with stainless fasteners bedded in urethane hybrid sealant before sealing the perimeter.

Free milestone planner

Is a milestone inspection coming due on your building?

Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.

Building type

Add the year and story count for an estimated due date.

About this estimate

This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.

Impact Windows & Doors · Broward

Impact windows and doors in Broward County go in under the state building code's High-Velocity Hurricane Zone rules, which cover only Broward and Miami-Dade. Our crews install impact-rated windows, sliding glass doors and lobby entry systems for condominium associations and commercial properties. Before each new unit is set, we repair the concrete and stucco around the opening.

Fixing the opening is what sets a restoration contractor apart from a window installer. On older buildings the sills, jambs and headers are often cracked or spalled around rusted original anchors. An impact door screwed into broken concrete cannot meet its rating and will leak around the edges. We repair the opening first, then anchor the unit per its product approval with stainless steel fasteners and a urethane hybrid sealant around every one, so no screw touches concrete and rusts.

Brett Serpe, MBA, GC, CEO of SERPE-CO

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974

Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.

Impact windows and doors in Broward County by SERPE-CO
Broward County coastal condominium buildings

Local conditions

Windows and doors on aging Broward towers

Oceanfront condominiums from the 1960s through the 1980s in Hallandale Beach, Hollywood, Pompano Beach and Fort Lauderdale went up with non-impact windows and sliders, and many later had accordion or roll-down shutters added. By now the aluminum frames are pitted, the tracks hold water, and the steel screws holding everything in place have rusted into the sills and slab edges.

Broward associations often replace every opening in the building during or just after a concrete restoration, while swing stages are already hanging and crews are rebuilding balcony slabs and thresholds. Any product installed here needs an approval that is valid in the High-Velocity Hurricane Zone, and installers have to follow the approved anchoring and substrate conditions. Under the permit, the city building department inspects the work.

Buildings that need this work

Broward openings we replace, tower to walk-up

Broward's oceanfront towers have the biggest openings: full-width sliders to the balconies, fixed floor-to-ceiling glass on the corners and wide beach-facing lobby storefronts. Wind pressure climbs with height and at building corners, so an upper corner unit may need a higher-rated version of the same door than a low floor does. Intracoastal buildings in Hallandale Beach, Pompano Beach and Fort Lauderdale have similar openings, with less salt damage in the concrete around each frame.

Inland condos come with their own mix of openings. In Coconut Creek, Margate, Lauderhill, Sunrise and Tamarac, three- and four-story buildings often still have original awning or jalousie windows on the catwalk side, a unit entry door onto that walkway and a slider to a small back balcony or screened porch. The frames sit in stucco over concrete block rather than poured concrete. Commercial work in the county covers storefronts, entry doors and lobby glass at offices, clinics and retail centers.

Have a question about your building?Call the office or send a quick request. A real person answers.

The work

Impact windows and doors in Broward County: what the job covers

  1. 01Installing impact windows and sliding glass doors
  2. 02Common-area entries and storefront systems
  3. 03Repairs to sills, jambs and headers
  4. 04Perimeter sealants and waterproofing
  5. 05Stucco and finishes restored around each opening
  6. 06Phased building-wide replacement for associations
Impact Windows & Doors work underway in Broward County

Our approach

One unit at a time in an occupied tower

We measure every opening and submit shop drawings and product approvals with the permit. On install day, the old window or door comes out, the opening is checked, and concrete or stucco repairs are finished before the new frame goes in. Our goal is to take out and replace each unit the same day, so no home is left open overnight.

Residents get a schedule by stack and floor, along with simple instructions for clearing furniture and blinds from the work area. We lay floor protection along the route to each opening. With the frame anchored, we seal the perimeter, tie the sill into the balcony waterproofing if the balcony has it, and restore finishes inside and out around the new unit.

SERPE-CO brings more than 20 years in the field to every job. Read about our full impact windows & doors service or browse all our work in Broward County.

Planning ahead

Running a building-wide window job in Broward

Replacing windows across a Broward building begins with a survey and a review of the association's documents. Those documents show who is responsible for the openings, the association or the individual owners, and the board adopts one spec for product, frame color and glass. Then every opening gets measured, since actual sizes vary more than the original drawings show. On beachfront property the glass tint belongs in the spec: Broward's sea turtle nesting season runs March 1 to October 31, and the building official can explain the lighting ordinances each coastal city has adopted.

The schedule depends on lead time and weather. Units are built to order only after permit drawings get approval, which means ordering months ahead of installation. Each opening comes out and gets its new unit within one working day, and if a storm is forecast, crews only open as many as they can close the same day. Broward boards often pair the project with balcony repairs or a repaint. Where the association is responsible for windows and exterior doors, Florida's structural integrity reserve study counts them as a required component.

How we run a job

Site walk first, closed permit last.

  1. 01

    Meet on site

    Each job starts on site, walking the property and its conditions with your manager, board or engineer.

  2. 02

    Follow the engineer's scope

    The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.

  3. 03

    Put safety first

    We can never work too safely: shoring, swing stages, barricades and notices go up first.

  4. 04

    Build the repairs

    Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.

  5. 05

    Finish and document

    Final inspections, a closed permit and a full record of the work for the association.

Ready for a site visit?Tell us where the building is and what you are seeing. We will set up a time to walk it.

Summary

What Broward boards and owners should remember

  • 01

    On Broward oceanfront towers, corner units and upper floors may need products rated for higher pressure than the floors below.

  • 02

    Many inland Broward condos still have original awning or jalousie windows, plus entry doors opening right onto a catwalk.

  • 03

    Because of sea turtle lighting ordinances, beachfront buildings in Broward should check glass tint with the city first.

  • 04

    Every impact unit is made to order, so expect a gap between permit approval and installation on a Broward project.

Questions

Impact Windows & Doors in Broward: questions we hear

Which product approval do Broward County impact windows need?

The county sits inside the High-Velocity Hurricane Zone. Any window or door installed in Broward needs a product approval valid for that zone, a Miami-Dade Notice of Acceptance being one example, and must be installed the way the approval describes. The city building department reviews approvals with the permit.

Should a Fort Lauderdale condo do sliding doors before or after balcony repairs?

Doing both together, or the doors right after, works best. Balcony work frequently rebuilds the threshold and slab edge under the door, and the new sill has to tie into the balcony waterproofing. Installing doors first puts them at risk during chipping and leaves the threshold detail unfinished.

In a Hallandale Beach or Hollywood condominium, may owners replace windows on their own?

The answer is in your condominium documents, which assign responsibility for windows and doors and set the specifications owners have to follow. Many associations adopt one standard for the whole building covering product, color and installation so the facade looks uniform and the perimeter waterproofing stays consistent.

Will new windows on a Pompano Beach or Fort Lauderdale beachfront condo need tinted glass?

Broward's coastal cities have beachfront lighting ordinances that protect nesting sea turtles, and those rules can limit how much interior light beach-facing glass lets through. The details vary by city and by whether the job is new construction or a replacement. Your city's building official confirms which rules apply, and we write the tint into the product specification.

In a Hollywood tower, why do the upper floors get different windows than the lower ones?

Design wind pressure goes up with height and is greater at a building's corners. Every product approval lists the sizes and pressures a window or door is rated to handle. An engineer works out the pressure at each opening, every unit is matched with a product whose rating meets or beats that number, and we anchor it the way its approval requires.

What is the usual timeline for new windows and sliders in a Broward County condominium?

Most of the calendar goes to the steps before installation: survey, shop drawings, permit review and fabrication. When the units arrive, crews usually finish a set number of openings per day, one stack at a time. For impact windows and doors in Broward County, SERPE-CO issues a unit-by-unit calendar so every household knows its install day well ahead.

Laws and rules cited

Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.

Working with an engineer?

Holding drawings, specifications or a complete set of bid documents?

Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.

Request an estimate

Let's plan your restoration.

Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.

  • More than 20 years in the field
  • St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
  • Family-owned Certified General Contractor

Rather call?(954) 718-3094

Work needed (choose all that apply)
Call Request an estimate