(954) 718-3094 Request an estimate

Broward County, Florida

Concrete Restoration in Dania Beach

From condominium walkways to boatyard and warehouse slabs on the Cut-Off Canal and new structural work for redevelopment, Dania Beach keeps a concrete crew busy.

In short

Who repairs concrete in Dania Beach?

SERPE-CO, a family-owned general contractor, provides concrete restoration in Dania Beach on condominiums, marine and industrial sites and commercial buildings. Crews take out spalled concrete, treat or replace rusted rebar, rebuild columns, walkways and slabs, fix or replace floor panels and waterproof the surface. Structural repairs are inspected and specified by a licensed engineer or architect, with permits from the Building Division.

Free milestone planner

Is a milestone inspection coming due on your building?

Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.

Building type

Add the year and story count for an estimated due date.

About this estimate

This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.

Dania Beach

SERPE-CO offers concrete restoration in Dania Beach, where the buildings look nothing like the high-rise beaches to the north and south. Public parkland covers most of the shore, so the concrete that needs care sits in low-rise and mid-rise condominiums, canal boatyards and marine buildings, warehouses by the airport and port, and the shops along Federal Highway. Our family firm has more than 20 years in the field, works from its Pompano Beach office and follows the engineer's specification on every structural repair.

No city in Broward County was incorporated earlier than Dania Beach, and its location between Port Everglades, Hollywood and Fort Lauderdale-Hollywood International Airport made it a working town as well as a beach town. Marine trades, freight and logistics, and newer mixed-use projects near Interstate 95 all shape the local building stock. Concrete repair and new concrete work in the city reflect that blend, and the sections below take the districts one at a time.

Brett Serpe, MBA, GC, CEO of SERPE-CO

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974

Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.

Concrete Restoration in Dania Beach by SERPE-CO

Summary

Dania Beach: quick facts

  • 01

    No city in Broward County was incorporated before Dania Beach.

  • 02

    Public park and pier make up most of the Dania Beach shoreline, without the condominium towers that line nearby coastal cities.

  • 03

    Dania Beach marine businesses gather on the Dania Cut-Off Canal, a channel linked to Port Everglades and the Intracoastal Waterway.

  • 04

    Within Dania Beach, the Community Development Department's Building Division is the office that runs the Building Safety Inspection Program.

  • 05

    Warehouse and logistics buildings are common in Dania Beach because the city sits between Port Everglades and Fort Lauderdale-Hollywood International Airport.

Local building stock

Dania Beach concrete by area: beach, corridors, canals

Along the ocean, Dania Beach has a short strip of sand, a city park and a fishing pier, a state park to the north, and mangroves and the Intracoastal Waterway behind. The city never built the line of oceanfront towers its neighbors have. Its residential concrete buildings sit on Dania Beach Boulevard and in the neighborhoods east of Federal Highway toward the waterway, mostly low-rise and mid-rise condominium communities from the 1960s and 1970s.

Federal Highway is the spine of downtown Dania Beach, lined with older one-story and two-story commercial buildings and, lately, a few mid-rise apartment buildings over structured parking. Dania Pointe, west of downtown next to Interstate 95, is a large mixed-use project holding hotels, offices, apartments and stores. Running east and west, Griffin Road and Stirling Road carry most of the city's commercial traffic, with showrooms, office buildings and shopping centers on both sides.

Boatyards and marinas in Dania Beach gather along the Dania Cut-Off Canal, the channel that connects inland yards to Port Everglades and the Intracoastal Waterway. Repair yards, boat storage buildings, travel-lift piers and seawalls line its banks. Near the airport and the southern entrance to the port, light industrial buildings and warehouses take over. Most of those buildings are tilt-wall or masonry, with floors on grade that carry heavy wheel loads every day.

Have a question about your building?Call the office or send a quick request. A real person answers.

Common failures and causes

What Dania Beach concrete has to survive

Eastern Dania Beach condominiums sit near mangroves and tidal water, and the humid air there carries salt even where no waves break. Corrosion tends to appear at stair landings, exterior walkways, balcony edges and the columns of open parking at ground level. Many 1960s and 1970s buildings still have original railings embedded in the slab and stucco cracked by decades of weather. Engineers find that water getting into flat walkway surfaces causes much of the harm.

Boatyards and industrial sites in Dania Beach face rougher conditions than the condominiums. Along the Dania Cut-Off Canal, brackish water wets the piers and slabs while boat lifts and forklifts load them. Point loads crack yard slabs, and once a crack opens near the waterline the steel inside rusts fast. Close to the port and airport, warehouse floors wear at the joints and sink where the subgrade was not prepared well, and truck traffic wears down docks and aprons.

Services

Concrete Restoration in Dania Beach: our scope of services

Concrete Restoration

In Dania Beach, most structural repair happens on low-rise and mid-rise buildings, worked from lifts or scaffold. On condominiums, SERPE-CO repairs stair structures, beams, columns and walkway slabs, and on marine and commercial buildings it repairs the structural members the engineer identifies. Crews cut back to sound concrete, clean or replace and coat the steel, and rebuild the section. Close to the canals, coatings and mortars are chosen to hold up in wet, brackish conditions.

Industrial Floors

Warehouses, logistics buildings and boatyards in Dania Beach rely on slabs built for concentrated loads. SERPE-CO rebuilds joints, replaces broken slab panels, thickens and adds reinforcement beneath racking and lifts where the engineer designs it, and pours new dock aprons and yard paving. For tenant improvements near the port and airport, new floors are finished to the flatness the operation needs.

Structural Concrete

New construction has followed redevelopment along Interstate 95 and Federal Highway in Dania Beach, and many owners keep expanding the buildings they already have. Working from the structural drawings, SERPE-CO forms and places grade beams, foundations, columns, slabs and elevated decks for new structures and additions. Every new building in the city must meet the Florida Building Code provisions for the High-Velocity Hurricane Zone.

Balconies & Railings

A typical Dania Beach condominium has an open walkway on each level and balconies or screened porches behind the units. SERPE-CO repairs the slab and its edges, swaps railings embedded in the concrete for surface-mounted ones, and seals the surface with a waterproof traffic coating. Each section is finished before the next opens, and protected paths and temporary guardrails keep every front door reachable.

Milestone & Recertification

After the city sends its inspection letter and the engineer writes the report, a Dania Beach owner has to correct any structural deficiencies listed. SERPE-CO prices the engineer's scope, applies for the permit, schedules the engineer's inspections as the job moves, and finishes the repairs. Because the Broward program covers commercial and industrial owners too, this work applies to marine buildings and warehouses as well as condominiums.

Commercial Roofing

With no row of oceanfront towers, Dania Beach roofing is spread out: condominium communities near Dania Beach Boulevard, offices and showrooms on Stirling Road and Griffin Road, and warehouses close to the port and airport. Working from the owner's engineer or consultant, SERPE-CO fixes leaks, coats membranes that are still sound, and puts HVHZ-approved systems on roofs that have failed, repairing the concrete deck below as needed.

Browse all our work in Broward County, or view the complete list of our services.

Inspections and permits

How inspections and permits work in Dania Beach

In Dania Beach, the Community Development Department's Building Division runs the Building Safety Inspection Program following the county Board of Rules and Appeals guidelines and the Florida Building Code. County policy calls for structural and electrical inspections when a building turns 25 and every 10 years from then on. Exempt categories are fee simple townhouses, government and school buildings, one-family to four-family dwellings of three habitable stories or fewer, and minor structures smaller than 3,500 square feet.

State law adds two more requirements for Dania Beach condominium and cooperative associations whose buildings have three or more habitable stories: a milestone inspection under Florida Statute 553.899, and a structural integrity reserve study under Florida Statute 718.112 done at least once every 10 years. Those inspections belong to a licensed engineer or architect, never to SERPE-CO. We build the repairs the report calls for under a Building Division permit, and the building official confirms the deadlines.

Around Dania Beach

Neighborhoods and corridors we cover

  • Downtown Dania Beach
  • Federal Highway corridor
  • Dania Beach Boulevard
  • Dania Beach Ocean Park
  • Dania Cut-Off Canal marine district
  • Dania Pointe
  • Griffin Road
  • Stirling Road
  • Melaleuca Gardens
Ready for a site visit?Tell us where the building is and what you are seeing. We will set up a time to walk it.

How we run a job

From the first site visit to a closed permit.

  1. 01

    Meet on site

    Each job starts on site, walking the property and its conditions with your manager, board or engineer.

  2. 02

    Follow the engineer's scope

    The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.

  3. 03

    Put safety first

    We can never work too safely: shoring, swing stages, barricades and notices go up first.

  4. 04

    Build the repairs

    Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.

  5. 05

    Finish and document

    Final inspections, a closed permit and a full record of the work for the association.

Questions

Questions we hear in Dania Beach

Who repairs concrete in Dania Beach?

SERPE-CO is the contractor for concrete restoration in Dania Beach on condominium balconies, walkways and columns, warehouse and marine slabs, and commercial buildings. On structural work, the owner brings in a licensed engineer or architect, who inspects and writes the specification. Our crews then build the repairs under a permit issued by the Building Division of the city.

Do Dania Beach warehouses and marine buildings get the 25-year inspection?

In most cases, yes. The Broward County program covers buildings and structures in general, not just condominiums, and only a few categories are exempt, among them small dwellings, government buildings and minor structures smaller than 3,500 square feet. Notices come from the city building official in Dania Beach, who also confirms whether a given marine or industrial property is covered.

Why are there so few oceanfront towers in Dania Beach?

Public land covers most of the Dania Beach shore: a city park and pier, with a state park on the north side and mangrove wetlands behind. Homes and businesses developed west of the Intracoastal instead. That is why concrete repair in Dania Beach leans toward low-rise and mid-rise buildings, structures along the canals and industrial property.

Why do boatyard slabs in Dania Beach crack and rust?

Travel lifts and forklifts put heavy point loads on yard slabs and piers, and brackish water wets them again and again. Load opens cracks, salt water gets to the rebar, and the steel rusts. Depending on the damage, repairs run from crack injection and shallow patching up to full panel replacement with a thicker, more heavily reinforced section the engineer designs.

Besides repairs, does SERPE-CO pour new structural concrete for Dania Beach projects?

SERPE-CO does both. Along with restoration, the company places new structural concrete in Dania Beach, such as foundations, slabs on grade, columns, elevated slabs and site paving for new buildings and additions. As a Certified General Contractor, it can also run projects that combine concrete with other trades. New work follows permitted structural drawings.

Laws and rules cited

Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.

Working with an engineer?

Holding drawings, specifications or a complete set of bid documents?

Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.

Request an estimate

Let's plan your restoration.

Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.

  • More than 20 years in the field
  • St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
  • Family-owned Certified General Contractor

Rather call?(954) 718-3094

Work needed (choose all that apply)
Call Request an estimate