(954) 718-3094 Request an estimate

Broward County, Florida

Structural Concrete in Broward County: Foundations, Slabs and Additions

Footings, slabs and structural pours for additions and new buildings.

In short

Who handles structural concrete in Broward?

SERPE-CO forms, reinforces and pours structural concrete in Broward County for developers, owners and general contractors. With a city building permit in hand and the structural engineer's drawings as the guide, we build footings, slabs, grade beams, columns, elevator pits, shear walls and tilt-up panels that meet the High-Velocity Hurricane Zone requirements in the Florida Building Code.

Free milestone planner

Is a milestone inspection coming due on your building?

Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.

Building type

Add the year and story count for an estimated due date.

About this estimate

This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.

Structural Concrete · Broward

Structural concrete in Broward County usually goes in on crowded, built-out sites, so access and sequence matter as much as forming and pouring. Our crews form, reinforce, place and finish footings, grade beams, columns, shear walls, slabs on grade, elevated slabs and tilt-up panels, whether the job is a new building, an addition or a structural change.

Foundation repair on existing buildings is part of our work too, where settlement or cracking has shown up. An engineer first evaluates what is causing it. SERPE-CO then builds the specified fix, which may mean coordinating underpinning, adding footings or grade beams, repairing cracks and rebuilding damaged structural members, all with shoring holding the load while it is transferred.

Brett Serpe, MBA, GC, CEO of SERPE-CO

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974

Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.

Structural concrete in Broward County by SERPE-CO
Broward County coastal condominium buildings

Local conditions

Soil and water across the county

Ground conditions are not the same from east to west. Along the coast and the Intracoastal in Pompano Beach, Hollywood and Fort Lauderdale, groundwater sits just below the surface, so footing and pit excavations have to be dewatered. Out west, parts of Weston, Miramar and Davie were built on old wetlands, and organic muck there must be dug out and replaced with compacted fill before any slab or foundation goes down.

Only two counties, Broward and Miami-Dade, are covered by the state building code's High-Velocity Hurricane Zone rules, and those rules shape structural design and the inspections a job goes through. Much new structural work in Broward is infill and redevelopment: commercial and warehouse buildings on small lots, building additions and equipment pads inside working facilities. Truck deliveries and pump setups are planned with neighbors and street traffic in mind.

Buildings that need this work

Who orders new structural concrete in Broward

Much of Broward's new concrete work comes from industrial and commercial owners. Tilt-up buildings and warehouse expansions in Miramar, Davie, Deerfield Beach and Pompano Beach need dock walls, panels, slabs and foundations. Marine businesses on Marina Mile and the New River need heavy pads and equipment foundations. Around the airport and Port Everglades, operators add generator pads, truck scales, mezzanine footings and tank foundations in buildings that never stop running, so pours are small and tightly scheduled.

Existing residential and institutional properties bring a different kind of structural job. Condo towers on A1A may need a generator enclosure, a new elevator or stair structure, or the replacement columns and beams an engineer's report calls for. Office and medical campuses in Coral Springs, Plantation and Fort Lauderdale add vaults, equipment pads and small additions squeezed between occupied buildings. Near downtown Hollywood and Fort Lauderdale, tight infill lots leave little room for forms, rebar deliveries or a pump truck, so we plan access before anyone digs.

Have a question about your building?Call the office or send a quick request. A real person answers.

The work

Structural concrete in Broward County: what the job covers

  1. 01Grade beams, footings and foundations
  2. 02Elevated and on-grade slabs
  3. 03Tilt-up panels, shear walls, columns and beams
  4. 04Settled and cracked foundation repair
  5. 05Forming, rebar and pumped concrete placement
  6. 06Additions and changes to existing structure
Structural Concrete work underway in Broward County

Our approach

Pour planning for tight lots and busy working facilities

Ahead of every pour we go through the structural drawings and rebar shop drawings, coordinate sleeves and embedded items with the other trades, and book the inspections the building department and engineer require. Forms and reinforcing get checked against the plans before any concrete is ordered. Where trucks cannot get close we pump, and the finishing crew is sized to the volume.

When we add to or modify an occupied building, existing structure is shored before it is cut or loaded, the work area is closed off from tenants and residents, and loud or disruptive tasks are timed with the owner. Curing and stripping forms follow the engineer's requirements. Test cylinders are taken as the specification calls for, documenting strength before any load goes on.

SERPE-CO brings more than 20 years in the field to every job. Read about our full structural concrete service or browse all our work in Broward County.

Planning ahead

Getting a Broward structural pour ready

In Broward, structural concrete planning starts in the ground, with a geotechnical report, which tells the structural engineer how much the soil can carry, the depth of the groundwater and whether muck or loose fill has to come out. The city building department then reviews the engineer's signed and sealed drawings for a permit under the Florida Building Code and its High-Velocity Hurricane Zone provisions. Rebar shop drawings, the mix submittal and the inspection sequence all get approved before forms go up.

Broward weather and logistics drive the pour calendar. In summer, crews start at first light so concrete is placed and finished ahead of the midday heat and the afternoon storms. Coastal excavations get dewatered, and open footings are covered against heavy rain that could flood them. In hurricane season, we brace or tie down formwork, stored materials and rebar cages as a storm approaches, because safety on the site comes first. Truck routes, pump positions and any lane closures are set up with the city ahead of time.

How we run a job

Site walk first, closed permit last.

  1. 01

    Meet on site

    Each job starts on site, walking the property and its conditions with your manager, board or engineer.

  2. 02

    Follow the engineer's scope

    The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.

  3. 03

    Put safety first

    We can never work too safely: shoring, swing stages, barricades and notices go up first.

  4. 04

    Build the repairs

    Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.

  5. 05

    Finish and document

    Final inspections, a closed permit and a full record of the work for the association.

Ready for a site visit?Tell us where the building is and what you are seeing. We will set up a time to walk it.

Cities served

Structural Concrete throughout Broward County

Summary

What Broward boards and owners should remember

  • 01

    Much of Broward's new structural concrete is industrial, such as dock walls, tilt-up panels and equipment foundations in Davie, Miramar and Pompano Beach.

  • 02

    On a Broward site the geotechnical report comes first, since buried muck and groundwater depth drive the foundation design.

  • 03

    Structural drawings in Broward get permit review under the Florida Building Code and its High-Velocity Hurricane Zone provisions.

  • 04

    Summer pours in Broward begin at dawn so crews finish ahead of the heat and storms.

Questions

Structural Concrete in Broward: questions we hear

Why do foundations settle in Davie, Miramar and western Broward County?

Typical causes include organic soil or loosely compacted fill under the footing, shifting groundwater levels and new loads the foundation was never designed to carry. Warning signs are stair-step cracking, floors that slope and doors that stop closing square. A geotechnical or structural engineer finds the cause and specifies the repair, and SERPE-CO builds it.

Are special inspections needed for structural pours in Fort Lauderdale?

The city building department inspects structural work at set stages, for example the reinforcing steel before concrete is placed. Under Florida law, larger buildings classified as threshold buildings also need a special inspector hired by the owner. Your engineer of record and the building official decide what your project requires.

Can new equipment foundations go in while our Pompano Beach facility keeps running?

Yes. A controlled section of the existing slab is saw-cut and removed, then we excavate, form and reinforce the foundation and place concrete with a pump or buggies. We work out dust, noise and access with the facility ahead of time so storage or production nearby keeps going.

Do you need a soil report before a foundation pour in Broward County?

For structural work the engineer normally asks for one. Soil and groundwater change a lot across the county, and the geotechnical report fixes the bearing capacity the design can use and any soil that must be replaced. On structural concrete in Broward County, SERPE-CO builds from the engineer's drawings, so the footing sizes and details we are given already account for those findings.

What is the process for building tilt-up warehouse panels in Miramar or Deerfield Beach?

Each panel is cast lying down on the floor slab or a separate casting bed, and the rebar, lifting inserts and embeds are set per the shop drawings. Once the concrete reaches its specified strength, a crane stands each panel onto its footing, and temporary bracing holds it until the connections and roof framing lock the building together.

What does hurricane season mean for a Fort Lauderdale concrete schedule?

Work keeps going from June through November, but the schedule needs room for storm days. When a storm threatens, we brace forms and rebar, remove or tie down loose material and secure cranes the way their manufacturers require. A pour does not start unless the crew can finish and protect it before the weather gets here.

Laws and rules cited

Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.

Working with an engineer?

Holding drawings, specifications or a complete set of bid documents?

Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.

Request an estimate

Let's plan your restoration.

Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.

  • More than 20 years in the field
  • St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
  • Family-owned Certified General Contractor

Rather call?(954) 718-3094

Work needed (choose all that apply)
Call Request an estimate