Broward County, Florida
Industrial Concrete Floors in Broward County
Flat new slabs, joints built for forklift traffic and finishes made to last.
In short
Who handles industrial concrete floors in Broward?
SERPE-CO repairs and builds industrial concrete floors in Broward County for manufacturers, warehouse owners, distributors and marine operators. We pour new slab-on-grade panels, rebuild and fill damaged joints, repair cracks and spalls, then grind, polish or coat the slab so it holds up under forklift traffic and racking loads.
Free milestone planner
Is a milestone inspection coming due on your building?
Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.
Add the year and story count for an estimated due date.
Want a second look at your timeline? Send your building details and SERPE-CO will follow up about the inspection, likely repairs and how to plan for them.
About this estimate
This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.
Industrial Floors · Broward
Forklifts, pallet jacks and loaded racking test industrial concrete floors in Broward County every working day, and the joints usually give out first. SERPE-CO pours new slab-on-grade floors, rebuilds and refills joints, fixes spalls and cracks, and polishes, coats or grinds existing slabs. A warehouse needs a hard, flat floor that cleans easily and leaves wheels and product alone.
Joints are where most floor trouble begins. A hard wheel hits a joint edge with nothing under it, a chip breaks off, and every trip after that makes the gap wider. Next come curled slab corners, a dusty surface that was finished weak, and cracks from settlement or overloads. Our first job is finding the cause of the wear. Repairs then use semi-rigid joint filler, rebuilt edges, crack repair and a surface treatment matched to the traffic.

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974
Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.


Local conditions
Where Broward's warehouses and distribution centers sit
Industrial property in Broward sits mostly away from the beach. Clusters surround Port Everglades and the airport in Dania Beach and Fort Lauderdale, line the rail and highway corridors through Deerfield Beach and Pompano Beach, and fill newer distribution parks in Sunrise, Davie and Miramar. In older Oakland Park and Pompano Beach buildings, many floors were poured long before today's rack heights and lift truck loads were part of the picture.
With little open land left, owners here tend to upgrade the buildings they have instead of building new. Floor projects are therefore mostly renovations: turning a general warehouse into food, pharmaceutical or e-commerce space, fixing joints ahead of new racking, or polishing a slab that dusts. Once an industrial building over 3,500 square feet turns 25, the county's Building Safety Inspection Program also applies, and structural items may join the scope.
Buildings that need this work
Industrial floors across Broward's work districts
Around Fort Lauderdale-Hollywood International Airport and Port Everglades, floors serve cold storage, freight forwarding and cargo handling, carrying heavy container loads and constant lift truck turns, with moisture at every door in refrigerated space. Farther west on State Road 84, the boatyards of Marina Mile rely on heavy pads and aprons under travel lifts and boats on the hard. Older multi-tenant bays in Deerfield Beach, Oakland Park and Pompano Beach, near I-95 and the rail lines, usually sit on thin slabs with light reinforcing and wide, open joints.
Newer distribution buildings in western Broward, in Davie, Sunrise, Pembroke Pines and Miramar near the Sawgrass Expressway, I-595 and I-75, went up with bigger panels and tighter flatness for tall racking. In those buildings we usually find curled joints in the main aisles, cracking along column lines and wear at the dock doors. Tenants in food and manufacturing who share those parks often want a polished floor or resinous coating that cleans up to the standard their own inspectors hold them to.
The work
Industrial concrete floors in Broward County: what the job covers
- 01Placing and finishing new slab-on-grade
- 02Joints filled, repaired or rebuilt
- 03Spall and crack repairs
- 04Grinding, densifying and polishing concrete
- 05Urethane and epoxy coating systems
- 06Ramp, loading dock and equipment pad repairs

Our approach
Repairing floors while the building operates
We split the floor into zones and work nights or weekends so receiving, picking and shipping keep running. Each zone is cleared, repaired and handed back on a date the operations manager approves. Return-to-traffic time helps decide which filler, mortar or coating we use, and we state that time plainly before the first cut.
Our grinding and polishing machines run with dust collection attached. On new slabs and replacement panels we handle the subgrade, the reinforcing or joint dowels, placement and finishing, and we saw-cut joints at the right time so cracks land where they belong. When dock aprons, ramps or equipment pads are part of the problem, the same crew handles them during the same mobilization.
SERPE-CO brings more than 20 years in the field to every job. Read about our full industrial floors service or browse all our work in Broward County.
Planning ahead
Scheduling floor work while a Broward facility keeps running
In a Broward warehouse, floor work is planned around both the operation and the lease. First, the landlord and tenant should agree on who owns the slab, since many industrial leases put floor repairs on the tenant and structural items on the owner. We then tie the work to a natural pause such as a tenant changeover, a racking change or a slow season. Racking anchors belong in sound, level concrete, so joint and crack repairs come first.
Moisture is the floor-coating issue particular to Broward. Slabs sit over a high water table, and many older buildings were poured without a vapor barrier, so we test the slab for moisture before selecting any coating or resinous system. The city building department permits new slabs, dock modifications and structural changes, and whether a given repair scope needs one is up to the building official. When the calendar allows, we pour truck courts and outside aprons away from the wettest months.
How we run a job
Site walk first, closed permit last.
- 01
Meet on site
Each job starts on site, walking the property and its conditions with your manager, board or engineer.
- 02
Follow the engineer's scope
The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.
- 03
Put safety first
We can never work too safely: shoring, swing stages, barricades and notices go up first.
- 04
Build the repairs
Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.
- 05
Finish and document
Final inspections, a closed permit and a full record of the work for the association.
Cities served
Industrial Floors throughout Broward County
Summary
What Broward boards and owners should remember
- 01
Marina Mile boatyards along State Road 84 rely on heavy concrete pads and aprons built for travel lifts and hauled-out boats.
- 02
Thin slabs and wide joints in older Pompano Beach and Oakland Park warehouse bays often break down under modern lift trucks.
- 03
A high water table and missing vapor barriers in older floors mean Broward slabs get a moisture test before any coating.
- 04
Before a Broward warehouse anchors any new racking to the floor, its joint and crack repairs should already be finished.
Questions
Industrial Floors in Broward: questions we hear
Can our Pompano Beach warehouse stay open while the floor joints are repaired?
Yes. Crews move one aisle at a time. Broken edges are cut back and rebuilt, each joint is cleaned to full depth, and a semi-rigid filler goes in to carry the edge under wheel loads. Most fillers take traffic again after a short, known period, which we confirm before scheduling.
What makes a Miramar or Davie warehouse floor dust?
A dusting floor has a weak top layer, usually caused by too much water at the surface during finishing or by curing that fell short. That fine powder ends up on product and inside equipment. Once the weak layer is ground away and the slab is densified or polished, the surface hardens and the dust stops.
Are Broward County warehouses included in the Building Safety Inspection Program?
Yes, the program reaches beyond condominiums. Board of Rules and Appeals Policy 05-05 applies to buildings and structures once they are 25 years old, with listed exemptions, among them minor structures below 3,500 square feet. The inspection itself is done by a licensed engineer or architect, and your building official can tell you whether your property is covered.
In a leased Deerfield Beach warehouse, who is in charge of floor repairs?
That comes down to the lease. Plenty of industrial leases make the tenant maintain the slab surface and joints while the landlord keeps structural items, but the language varies. Read the lease, or check with your attorney, before approving work. SERPE-CO can record the floor's condition in photos and on a marked-up plan for landlord or tenant.
Why test a Broward County warehouse slab for moisture before it is coated?
Vapor moving up through a slab can blister a coating or break its bond. Much of the county sits over a shallow water table, and many older floors lack a vapor barrier. For industrial concrete floors in Broward County, we start with a slab moisture test, then choose a system rated for the reading or suggest polishing.
Can a Fort Lauderdale boatyard or marine business on Marina Mile get heavy-duty concrete pads?
Yes. An engineer sizes each pad and apron for the wheel loads of the travel lifts, forklifts and boats it will carry. Our crews prep the subgrade, tie in reinforcing and dowels per the drawings, place and finish the slab, then saw the joints. The work moves bay by bay so the yard can keep hauling and launching boats.
Laws and rules cited
- Broward County Board of Rules and Appeals Policy 05-05: Building Safety Inspection Program
- Florida Statute 553.899: mandatory structural inspections for condominium and cooperative buildings
- Florida Statute 718.112: structural integrity reserve studies
Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.
Working with an engineer?
Holding drawings, specifications or a complete set of bid documents?
Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.
Request an estimate
Let's plan your restoration.
Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.
- More than 20 years in the field
- St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
- Family-owned Certified General Contractor
Rather call?(954) 718-3094