(954) 718-3094 Request an estimate

Broward County, Florida

Milestone Inspection Repairs in Broward County

We take the engineer's report through to permit closeout, on a timeline the board can plan for.

In short

Who handles milestone inspection repairs in Broward?

After the inspection report comes back from a licensed engineer or architect, SERPE-CO carries out milestone inspection repairs in Broward County for condo, co-op and commercial owners. We price the engineer's scope and permit it, then finish the balcony, railing, concrete, waterproofing and similar repairs so the engineer can sign off that the building is fit for continued use.

Free milestone planner

Is a milestone inspection coming due on your building?

Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.

Building type

Add the year and story count for an estimated due date.

About this estimate

This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.

Milestone & Recertification · Broward

Milestone inspection repairs in Broward County cover the structural, waterproofing and building envelope fixes that a licensed engineer or architect lists after inspecting a property for the county's Building Safety Inspection Program. The inspection is the engineer's job, not ours. SERPE-CO is the contractor that does the repairs: we take the engineer's report and scope, price it and build a phasing plan and schedule for the board to approve, pull the permit and stay with the job until the engineer signs off.

Florida Statute 553.899 requires a milestone inspection for condominium and cooperative buildings with three or more habitable stories, and in Broward that requirement is met through the county program. Board of Rules and Appeals policy says a Building Safety Inspection counts as compliance with phases one and two of the state milestone inspection. What that means for a board is a single report and a single list of required repairs.

Brett Serpe, MBA, GC, CEO of SERPE-CO

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974

Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.

Milestone inspection repairs in Broward County by SERPE-CO
Broward County coastal condominium buildings

Local conditions

Broward's Building Safety Inspection Program, explained step by step

Policy 05-05 from the Board of Rules and Appeals calls for structural and electrical inspections once a building turns 25, counted from its certificate of occupancy, and again every 10 years. Every summer, your city's building official mails a Notice of Required Inspection to the buildings that are due. From there, the owner or association has 180 days to get the inspection done and the report filed. The building official may allow an extension of up to 60 days under the policy.

When the report calls for repairs, the policy allows 180 days from the report date to finish them, unless the building official sets a different period. If the work cannot be done in that window, the engineer can set out a longer schedule for the building official to approve, as long as the permit remains active. After the repairs, the engineer inspects again and issues an amended report stating the building is acceptable for continued use.

Buildings that need this work

Broward buildings now getting inspection reports

In Broward, oceanfront condo towers in Hallandale Beach, Hollywood, Pompano Beach and Fort Lauderdale were the first big group to work through inspection reports, and many have moved into a later 10-year cycle. Their reports usually flag railings and balcony slab edges, beams and columns on open parking levels, roof slabs, stair towers and the pool deck above the garage. The same report covers electrical findings too, like corroded panels, emergency lighting and meter rooms, which need a licensed electrical contractor.

Large numbers of inland Broward buildings are now hitting their inspection dates. The three- and four-story condo communities of Sunrise, Margate, Pembroke Pines, Tamarac, Lauderdale Lakes and Lauderhill have many separate buildings, and every one gets inspected. Reports there tend to call for stair and catwalk repairs, railing fixes, roof-level items and cracked stucco that hides spalled concrete. Commercial owners are part of it too: hotels, warehouses, shopping centers and office buildings larger than the size exemption are covered by the same county inspection program as condominiums.

Have a question about your building?Call the office or send a quick request. A real person answers.

The work

Milestone inspection repairs in Broward County: what the job covers

  1. 01Review of Phase 1 and Phase 2 engineering findings
  2. 02Engineer's scope priced, phased and scheduled for board approval
  3. 03Envelope, waterproofing and structural concrete repairs
  4. 04Permits and building department inspections
  5. 05Ongoing coordination with your engineer of record
  6. 06Project records for association files
Milestone & Recertification work underway in Broward County

Our approach

From the report in hand to a closed permit

Our first step is going through the report with the engineer and walking the building to check locations and access. The board then gets our written price for the engineer's scope, phased by elevation or area, with the access method for each phase and an organized schedule. Since the repair window is tight, the permit application and orders for long-lead materials and railings start once the scope is approved.

While repairs are underway, the engineer checks exposed steel and every stage of the work. Where the engineer has written a letter allowing residents to stay during repairs, we plan to keep it that way, with covered entrances, balcony closures in phases and clear exit routes. Once the work is done, we hand the engineer the repair records the amended report depends on, and the city closes out our permit.

SERPE-CO brings more than 20 years in the field to every job. Read about our full milestone & recertification service or browse all our work in Broward County.

Planning ahead

Preparing a Broward board for the report and what follows

The most time a Broward board can buy comes from moving before the notice shows up. The building official confirms which year a building is due, so the association can bring in its engineer a year or more early, have the building surveyed and learn the probable scope early enough to plan the funding. Florida law also requires condo buildings of three or more habitable stories to update a structural integrity reserve study no less than every 10 years, and the two documents belong side by side.

Once the report is out in Broward, three tracks run at the same time. On one, the engineer produces the signed and sealed repair drawings and the bid quantities. On another, the board lines up funding, which under most condo documents means notices, meetings and votes that take weeks. On the third, SERPE-CO assembles the city building department permit application and orders long-lead items like railings. If the work will outlast the repair period, the engineer gives the building official a schedule, and the permit stays active until the amended report is filed.

How we run a job

Site walk first, closed permit last.

  1. 01

    Meet on site

    Each job starts on site, walking the property and its conditions with your manager, board or engineer.

  2. 02

    Follow the engineer's scope

    The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.

  3. 03

    Put safety first

    We can never work too safely: shoring, swing stages, barricades and notices go up first.

  4. 04

    Build the repairs

    Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.

  5. 05

    Finish and document

    Final inspections, a closed permit and a full record of the work for the association.

Ready for a site visit?Tell us where the building is and what you are seeing. We will set up a time to walk it.

Summary

What Broward boards and owners should remember

  • 01

    A Broward association that hires its engineer well ahead of the due date, a year or more, sees the likely repair scope early.

  • 02

    Because Broward inspection reports cover electrical findings too, most repair projects need a licensed electrical contractor on the team.

  • 03

    Every building in a large inland Broward community is inspected, so phasing across the property becomes central to planning.

  • 04

    Broward commercial buildings past the size exemption are covered by the Building Safety Inspection Program, just as condominiums are.

Questions

Milestone & Recertification in Broward: questions we hear

After a Broward County Building Safety Inspection, what is our deadline to finish the repairs?

Policy 05-05 of the Board of Rules and Appeals allows 180 days from the report date, unless the building official sets something different. If the scope cannot be finished in that time, the engineer may put forward a longer schedule for the official's approval, provided the permit stays active. Your city's building department can confirm the exact deadline for your property.

Do Hollywood and Fort Lauderdale buildings still need 40-year recertification?

No, the old 40-year program has been replaced. Under the current Broward policy, the first inspection comes at 25 years and repeats every 10 years. A building that already completed an inspection under the old 40-year program is considered compliant, and its next inspections fall every 10 years counted from the year its first one was required.

Will SERPE-CO do the Building Safety Inspection on our Broward County building?

No. A Florida licensed engineer or architect has to perform the inspection, and the structural part on larger buildings calls for additional qualifications. Our role is carrying out the repairs. If your association still needs an engineer, we are glad to help you get started and will work closely with whoever you hire.

Should a Pompano Beach association bring in its contractor before the engineer's report or after?

After the report, but not long after. The engineer's repair documents set the scope every contractor bids, so bids taken before those documents exist cannot be compared. Even so, SERPE-CO can tour the building early with the board and the engineer and talk through phasing, access and lead times, which closes the gap between report and permit.

Which repairs show up most often in Broward County inspection reports?

Reports often call out spalled concrete on columns, beams, catwalks and balconies, along with loose or non-compliant railings, failed deck waterproofing, electrical corrections and cracked stucco. Milestone inspection repairs in Broward County are set one building at a time, and only your engineer's report says what your property needs and in what order of urgency.

In a Lauderhill or Tamarac community with many buildings, how are required repairs phased?

The engineer ranks findings by urgency across every building. Safety items such as unsound walkways, stairs and railings get fixed first, wherever they are. The rest is then grouped by building, so crews, access equipment and the disruption to residents move through the property step by step under the approved schedule.

Laws and rules cited

Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.

Working with an engineer?

Holding drawings, specifications or a complete set of bid documents?

Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.

Request an estimate

Let's plan your restoration.

Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.

  • More than 20 years in the field
  • St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
  • Family-owned Certified General Contractor

Rather call?(954) 718-3094

Work needed (choose all that apply)
Call Request an estimate