Martin County, Florida
Industrial Concrete Floors in Martin County
Flat new slabs, joints built for forklift traffic and finishes made to last.
In short
Who handles industrial concrete floors in Martin?
SERPE-CO repairs, replaces and finishes industrial concrete floors in Martin County for warehouse owners, marine and service businesses and industrial landlords. Our crews rebuild worn joints, patch cracks and spalls, cut out and repour failed panels, and renew the wearing surface with grinding, densification, polishing or a coating, phasing the job so the facility keeps running.
Free milestone planner
Is a milestone inspection coming due on your building?
Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.
Add the year and story count for an estimated due date.
Want a second look at your timeline? Send your building details and SERPE-CO will follow up about the inspection, likely repairs and how to plan for them.
About this estimate
This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.
Industrial Floors · Martin
Industrial concrete floors in Martin County serve a mix of buildings: warehouses and light industrial space along Kanner Highway and near Witham Field in Stuart, flex and contractor buildings in Palm City, marine service and boat storage buildings by the water, and agricultural and equipment buildings out toward Indiantown. SERPE-CO travels up from Pompano Beach to repair and replace those slabs. The crews rebuild joint edges, fill control and construction joints, fix cracks and spalls, place new panels and bring worn floors back with grinding, densifier, polish or a coating.
The pattern of damage usually explains its cause. A row of broken joints shows where wheels have been pounding unsupported edges. Panels that rock or curl at the corners were often cured unevenly when poured. Gray powder on shelving shows a weak surface layer. A repair chosen for the real cause lasts, so SERPE-CO sorts out what is driving the failure before recommending a product, instead of covering it over and coming back to the same spot.

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974
Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.


Local conditions
Where Martin County floors take the most wear
Stuart holds much of the county's industrial and service space. Buildings along Kanner Highway, near the airport and off US 1 hold distribution, manufacturing, contractor and storage uses, and many were built for lighter loads than today's tenants bring. Marine businesses around the St. Lucie River and Manatee Pocket add boat storage and repair buildings, where forklifts carry heavy hulls across slabs that also take wash water, salt and solvents.
Palm City and the I-95 and Turnpike corridor west of Stuart have newer flex and warehouse buildings, while Hobe Sound and Jensen Beach have smaller service buildings and shops along US 1. Coastal humidity, salt air near the river and lagoon, and summer storms affect all of them, especially at dock doors and exterior slabs. Commercial warehouses fall outside the state milestone law, which targets condo and co-op buildings, so floor work is planned around the operator's needs, and structural repairs are permitted by the city, town or county building office for the address.
Buildings that need this work
Which Martin County facilities need floor work
Stuart has a large share of the county's industrial floor area. Warehouses and shops near Witham Field and along Kanner Highway and US 1 range from older block buildings to newer tilt-wall space, and tenants change often enough that floors get reused for loads they were never designed for. An operator replacing dry storage with heavier racking, refrigerated rooms or a parts operation usually inherits worn joints, low spots and cracked dock aprons.
The marine trade shapes many Martin County floors. Boat storage, repair and service buildings around the St. Lucie River and Manatee Pocket move heavy hulls on forklifts and trailers, and their slabs take wash-down water, salt and solvents. Farther west, agricultural, nursery and equipment buildings toward Indiantown sit on slabs that rarely dry out in summer, while Palm City flex buildings and smaller service shops in Jensen Beach and Hobe Sound need joint and topping repairs sized to their smaller floors.
The work
Industrial concrete floors in Martin County: what the job covers
- 01Placing and finishing new slab-on-grade
- 02Joints filled, repaired or rebuilt
- 03Spall and crack repairs
- 04Grinding, densifying and polishing concrete
- 05Urethane and epoxy coating systems
- 06Ramp, loading dock and equipment pad repairs

Our approach
How the work is phased in an operating building
The operations manager and our project lead agree on a zone plan before work starts. Each aisle, dock position or bay closes on a set date, is repaired and goes back into service on schedule, and night or weekend shifts cover areas where receiving cannot stop. Products are chosen partly for how fast they return to traffic, and the operator receives a clear closure time for each zone so labor and deliveries can be planned around it.
Dust collection runs on every grinder and polisher, keeping stock, machinery and offices clean. Replacement panels get a properly compacted base, dowels across the joints if the drawings show them, a careful finish and timely saw cuts. Exterior work such as aprons, ramps, wash pads and machinery slabs is brought into the same mobilization when it belongs to the problem, rather than scheduled as a separate trip.
SERPE-CO brings more than 20 years in the field to every job. Read about our full industrial floors service or browse all our work in Martin County.
Planning ahead
Planning floor repairs with a Martin County operator
A Martin County floor project begins on site during working hours, with the operator pointing out the heavy-traffic lanes, the joints that slam under wheels and the doors where storms blow water in. From there the zones follow the business: boats or stock to move, racking to empty, cold rooms to keep at temperature and docks that must stay open. Those decisions are settled before products are ordered, so nothing waits on the crew.
Weather plays a part even for interior floors. Summer thunderstorms drive water across aprons and into open bays, and nobody can pour or coat an outdoor slab while water stands on it. Marine businesses may have busy winter months, and distributors have their own peaks, so the schedule fits the quieter periods, allows for storm days during hurricane season, and states a return-to-traffic time for each zone.
How we run a job
Site walk first, closed permit last.
- 01
Meet on site
Each job starts on site, walking the property and its conditions with your manager, board or engineer.
- 02
Follow the engineer's scope
The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.
- 03
Put safety first
We can never work too safely: shoring, swing stages, barricades and notices go up first.
- 04
Build the repairs
Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.
- 05
Finish and document
Final inspections, a closed permit and a full record of the work for the association.
Summary
What Martin boards and owners should remember
- 01
Stuart holds much of Martin County's warehouse space, near Witham Field and along Kanner Highway and US 1.
- 02
Boat storage and marine service floors in Martin County face heavy hulls, wash water and salt.
- 03
Commercial warehouses fall outside the state milestone law, so floor repairs follow operations and tenant changes.
- 04
Each zone of a Martin County floor job has a set closure and hand-back date so the business keeps running.
Questions
Industrial Floors in Martin: questions we hear
Can a Stuart warehouse keep shipping while its floor joints are repaired?
Yes. The work moves zone by zone. Damaged joint edges are cut back and rebuilt with a repair mortar, the joint is cleared down to its base, and a semi-rigid joint filler is placed to carry wheel loads from one panel to the next. Each zone is out of service for a defined window agreed with your team in advance.
Why does dust keep settling on the racking in our Palm City building?
Constant dust usually comes from a soft surface layer, the result of too much water at the top during finishing or weak curing when the floor was placed. Grinding through that layer and applying a densifier, with polishing if the owner wants it, gives a hard surface that stops shedding.
Does a Martin County warehouse need a milestone inspection?
Usually not. Florida's milestone law reaches condominium and co-op buildings of three or more habitable stories, not commercial warehouses. Floor and slab work in an industrial building is typically driven by wear, a tenant change or a new use, and any structural repairs are permitted by the City of Stuart, another town or the Martin County Building Department.
Can the floor in our Stuart warehouse be leveled for higher racking?
Often. Grinding removes high spots, a cementitious underlayment fills the low areas and rebuilt joints keep the surface continuous. A slab that is heavily cracked or well out of level is usually better served by new panels. A flatness survey of the floor tells you which approach fits.
How quickly do repaired zones reopen in a Palm City facility?
Each material has its own timing. Joint fillers and rapid-setting mortars can carry traffic within hours, while freshly poured panels take days before they are strong enough. On industrial concrete floors in Martin County we confirm return-to-traffic times product by product before setting the schedule, so each zone has a fixed reopening date.
Our Port Salerno boat shop floor stays damp. Can it be coated?
Rising moisture is a frequent cause of coatings that bubble and lift. Testing the slab before coating shows how wet it is, and on damp floors a primer or system designed for moisture is used. For some buildings a polished or densified floor avoids the risk of a film coating altogether.
Laws and rules cited
- Martin County Building Department
- Florida Building Commission: Florida product approval
- Florida Statute 553.899: mandatory structural inspections for condominium and cooperative buildings
- Florida Statute 718.112: structural integrity reserve studies
Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.
Working with an engineer?
Holding drawings, specifications or a complete set of bid documents?
Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.
Request an estimate
Let's plan your restoration.
Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.
- More than 20 years in the field
- St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
- Family-owned Certified General Contractor
Rather call?(954) 718-3094