(954) 718-3094 Request an estimate

Martin County, Florida

Structural Concrete in Martin County: Foundations, Slabs and Structural Repairs

Footings, slabs and structural pours for additions and new buildings.

In short

Who handles structural concrete in Martin?

SERPE-CO forms and places structural concrete in Martin County for new construction, building additions and alterations to existing structures. Crews build footings, grade beams, ground and framed slabs, columns, shear walls and equipment bases from the engineer of record's plans, and the building department and the engineer check the work at each stage they set.

Free milestone planner

Is a milestone inspection coming due on your building?

Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.

Building type

Add the year and story count for an estimated due date.

About this estimate

This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.

Structural Concrete · Martin

Structural concrete in Martin County is often built close to water and close to neighbors, whether that is an addition beside an occupied building in Stuart, a new foundation in Palm City or a repair on an oceanfront condominium. SERPE-CO forms, reinforces, places and finishes spread footings, grade beams, ground slabs, framed upper slabs, columns, shear walls and machine foundations for new buildings, additions and alterations, following the drawings issued by the engineer of record.

Repairs to existing structures are the other half of the work. Where a building shows cracking, settlement or deteriorated beams and columns, the owner's licensed engineer works out why and designs the fix, and SERPE-CO builds it. Typical scopes include added footings or grade beams, work alongside a pile or underpinning subcontractor, rebuilt structural members and temporary shoring that holds the frame while load moves to the new work.

Brett Serpe, MBA, GC, CEO of SERPE-CO

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974

Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.

Structural concrete in Martin County by SERPE-CO
Martin County coastal condominium buildings

Local conditions

Soil, water and code conditions in Martin County

Martin County sits between the Indian River Lagoon, the St. Lucie River and the Atlantic, and on sites near any of them the water table can be shallow. Excavations for footings, elevator pits and utilities by the river in Stuart, the lagoon in Jensen Beach or the Intracoastal near Hobe Sound may need pumping before reinforcing can be placed. The geotechnical investigation tells the engineer where firm bearing soil starts and whether muck or loose sand must be replaced with compacted fill.

The High-Velocity Hurricane Zone covers only Miami-Dade and Broward, so Martin sits outside it, yet structural design still answers to the wind provisions of the Florida Building Code, and county permit forms reference the 8th Edition (2023) code. Permits are issued by the City of Stuart or the other towns inside their limits, and by the Martin County Building Department for unincorporated areas such as Jensen Beach, Palm City and Hobe Sound.

Buildings that need this work

Where structural concrete is needed in Martin

Stuart produces much of the structural work. Downtown and along the St. Lucie River, owners add onto existing buildings or adapt them with new stairs, elevator pits, openings and strengthened slabs, which means shoring before anything is cut. Commercial and light industrial sites along US 1 and Kanner Highway need equipment foundations, generator pads, truck docks and building expansions, frequently while the business inside keeps working.

Waterfront property has its own set of jobs. Condominiums on Hutchinson Island and along the lagoon in Jensen Beach need replacement columns, beams and slab sections where salt has reached the reinforcing steel, tied into a frame that is decades old. In Palm City and Hobe Sound, new clubhouses, amenity buildings and commercial structures go up on sites where soft ground or a shallow water table shapes the foundation design.

Have a question about your building?Call the office or send a quick request. A real person answers.

The work

Structural concrete in Martin County: what the job covers

  1. 01Grade beams, footings and foundations
  2. 02Elevated and on-grade slabs
  3. 03Tilt-up panels, shear walls, columns and beams
  4. 04Settled and cracked foundation repair
  5. 05Forming, rebar and pumped concrete placement
  6. 06Additions and changes to existing structure
Structural Concrete work underway in Martin County

Our approach

Our process for structural concrete in Martin

Preparation happens well before the trucks arrive. SERPE-CO reviews the structural set and rebar shop drawings, settles embeds, sleeves and blockouts with the plumbers, electricians and mechanical crews, and books each inspection required by the building official and the engineer of record. Forms, steel placement and clearances are checked against the drawings, and only then is concrete ordered, with a pump where trucks cannot reach and a finishing crew matched to the size of the pour.

Occupied buildings set the pace on alterations. Shores go in under the existing structure before saw cutting or new loads, dust and noise barriers separate the work from residents or tenants, and exits stay open. Forms are stripped and concrete is cured on the schedule the engineer sets, and the testing lab samples cylinders at each placement so there is a strength record before the work is loaded.

SERPE-CO brings more than 20 years in the field to every job. Read about our full structural concrete service or browse all our work in Martin County.

Planning ahead

Preparing a Martin County structural pour

Good structural projects in Martin begin with a full drawing set, a geotechnical report and a realistic site logistics plan. The soil report shows where organic layers or loose sand have to be excavated, how high the groundwater sits and whether pumping is needed. Drawings go to the City of Stuart, the town with jurisdiction or the Martin County Building Department, and threshold buildings add a special inspector hired by the owner. Reinforcing, embeds, pumps and lab testing are scheduled before crews mobilize.

The season shapes the schedule. Summer storms tend to build in the afternoon, so major placements begin at first light. Hurricane season, June 1 to November 30, means formwork, shoring, stacked materials and lifting equipment must be braced or taken down ahead of a storm. Waterfront sites near Stuart and Jensen Beach can also limit delivery routes and staging space, so truck timing and pump locations are settled with the owner and neighbors before the first pour.

How we run a job

Site walk first, closed permit last.

  1. 01

    Meet on site

    Each job starts on site, walking the property and its conditions with your manager, board or engineer.

  2. 02

    Follow the engineer's scope

    The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.

  3. 03

    Put safety first

    We can never work too safely: shoring, swing stages, barricades and notices go up first.

  4. 04

    Build the repairs

    Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.

  5. 05

    Finish and document

    Final inspections, a closed permit and a full record of the work for the association.

Ready for a site visit?Tell us where the building is and what you are seeing. We will set up a time to walk it.

Cities served

Structural Concrete throughout Martin County

Summary

What Martin boards and owners should remember

  • 01

    Shallow groundwater near the river, the lagoon and the ocean often means dewatering for Martin County footings and pits.

  • 02

    Martin is outside the High-Velocity Hurricane Zone, and its permit forms reference the 8th Edition (2023) Florida Building Code.

  • 03

    Stuart and the towns permit their own projects, and the county handles Jensen Beach, Palm City and Hobe Sound.

  • 04

    Repairs on older coastal buildings depend on careful shoring and on tying new concrete into the existing frame.

Questions

Structural Concrete in Martin: questions we hear

Why might footings near the St. Lucie River in Stuart need pumping?

Ground close to the river and the lagoon is often sandy, and groundwater may be only a short way down, so an open excavation can take on water fast. Pumps or wellpoints hold the level down while steel is set and concrete placed to the engineer's requirements. The soil report and the engineer of record decide when dewatering is needed.

Which building department reviews a structural project in Palm City?

Palm City is an unincorporated community, so the Martin County Building Department reviews the permit and inspects the work. Projects inside the City of Stuart or one of the towns go to that municipality instead. Confirm the jurisdiction for the address before drawings are submitted, since each office runs its own review.

Can a new equipment foundation go into a running facility near Kanner Highway?

Yes. Our crew cuts out only the section of floor the foundation needs, digs and forms it, sets the reinforcing and places concrete by pump or buggy. The facility manager helps plan dust control, noise windows and forklift routes so operations continue in the rest of the building while the pad cures.

What soil problems affect a structural project in Martin?

Sandy ground, pockets of organic soil and a shallow water table are the usual concerns, especially near the river and the lagoon. For structural concrete in Martin County, the geotechnical report identifies them, and the engineer of record writes the required excavation, fill and dewatering into the drawings that our crews build from.

How is new concrete connected to an older building in Stuart?

The engineer details the connection, which often uses dowels drilled and epoxied into the existing concrete or a new beam bearing on prepared supports. Our crews shore the existing structure, prepare the contact surfaces, set the dowels and steel, and pour the new element. Inspections confirm the connection before it is covered.

When can shores be removed from a new upper-floor slab?

Only when the engineer of record says so. Cylinders taken during the pour are broken by a testing lab at the ages the specification sets, and the engineer compares those results with the design strength before shores come out or loads go on. The results are kept for the owner and the building department.

Laws and rules cited

Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.

Working with an engineer?

Holding drawings, specifications or a complete set of bid documents?

Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.

Request an estimate

Let's plan your restoration.

Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.

  • More than 20 years in the field
  • St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
  • Family-owned Certified General Contractor

Rather call?(954) 718-3094

Work needed (choose all that apply)
Call Request an estimate