(954) 718-3094 Request an estimate

Martin County, Florida

Commercial Waterproofing in Martin County

Track down where water enters, then seal the envelope so the building stays dry.

In short

Who handles commercial waterproofing in Martin?

SERPE-CO delivers commercial waterproofing in Martin County for condominium associations and commercial property owners from Jensen Beach to Jupiter Island. Projects include finding the source of leaks, replacing window and joint sealants, installing balcony, breezeway and deck membranes, relining planters, sealing cracks and recoating the facade, with damaged stucco or concrete repaired before the waterproofing system goes on.

Free milestone planner

Is a milestone inspection coming due on your building?

Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.

Building type

Add the year and story count for an estimated due date.

About this estimate

This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.

Waterproofing · Martin

Commercial waterproofing in Martin County keeps water out of the condominiums, offices, clubhouses and shops that line the St. Lucie River, the Indian River Lagoon and the ocean. SERPE-CO travels north from Pompano Beach to cut out and replace failed sealant, lay membranes on balconies, breezeways and decks over occupied rooms, reline planters and pool decks, inject wall cracks and apply protective coatings. A building stays sound when its envelope is continuous, because a single open joint can feed moisture to the steel inside the concrete for years before anyone sees damage.

Before anything is removed, we work out where the water is actually getting in. The wet spot in a unit or hallway is often some distance from the entry point, and a window leak may begin at a cracked sill or a joint above the frame. Working with the association's engineer or consultant, our crews check the exterior, water-test suspect areas one at a time and then repair the confirmed source with the specified product. Exterior paint is part of the same system, since a well-bonded coating over sound stucco is the first barrier rain meets.

Brett Serpe, MBA, GC, CEO of SERPE-CO

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974

Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.

Commercial waterproofing in Martin County by SERPE-CO
Martin County coastal condominium buildings

Local conditions

Where Martin County weather gets into buildings

Martin County buildings face water from several directions at once. Summer afternoon storms arrive quickly with heavy rain and gusty wind, and tropical systems between June 1 and November 30 can push water against a facade for hours. The sun is strong all year, and sealants and elastomeric coatings that face south and east lose their flexibility and start to crack. On the coast, salt in the air adds to that wear and attacks metal flashings, railings and anchors.

Location determines the usual leak points. Hutchinson Island and Jupiter Island buildings take direct ocean exposure at balcony doors, windows and roof edges. Riverfront properties in Stuart and lagoon-side buildings in Jensen Beach see damp, brackish air that keeps stucco wet and breaks down joints. Hobe Sound, Palm City and the commercial corridors along US 1 have more low-rise and inland buildings, where flat roofs, parapet caps, storefront frames and breezeway decks are the places water most often finds a way in.

Buildings that need this work

Martin County buildings and their common leak points

Buildings along the ocean on Hutchinson Island and Jupiter Island take salt spray and wind-driven rain at sliding doors, window frames and the base of railings anchored into balcony slabs. When those anchors rust, they crack the concrete around them and open a fresh path for water. Roof edges, rooftop mechanical curbs and the joints where stairwells meet the main walls are the next most common sources, and a leak in one unit often traces back to a balcony or wall several floors above it.

Along the St. Lucie River in Stuart and the lagoon in Jensen Beach and Sewall's Point, buildings deal with damp, brackish air that keeps stucco wet and wears out joints between dissimilar materials. Mid-rise condominiums with pool decks or planters over garages leak into the parking level when those membranes fail. In Palm City, Hobe Sound and the commercial strips along US 1, offices and stores most often leak at flat roofs, parapets, storefront systems and the expansion joints between building sections.

Have a question about your building?Call the office or send a quick request. A real person answers.

The work

Commercial waterproofing in Martin County: what the job covers

  1. 01Water testing to trace leaks
  2. 02Sheet and liquid-applied membrane systems
  3. 03Pool deck, plaza and balcony waterproofing
  4. 04Below-grade and planter waterproofing
  5. 05New sealants and expansion joints
  6. 06Door and window perimeter sealant
Waterproofing work underway in Martin County

Our approach

Our process for stopping leaks in Martin County

Every leak call starts with the evidence inside the building. We look at the damaged ceiling or wall, check the exterior surfaces above and beside it, and when the path is not obvious, test one suspect area at a time with controlled water until the leak shows. The engineer's or consultant's scope then addresses that source directly, whether that means resealing joints, rebuilding a balcony or breezeway membrane, relining a planter or sealing cracks in the wall. Damaged stucco and concrete are repaired before any new waterproofing is applied.

Installation follows the manufacturer's published requirements and the project specification: surface preparation, primer, reinforcing fabric at corners and terminations, proper film thickness and the cure time between coats. Our crews watch the radar and plan coating work for dry windows, because most systems will not bond to a wet surface. Finished areas are water-tested where testing tells us something useful, and the board or manager receives a written record of each system and its location on the building.

SERPE-CO brings more than 20 years in the field to every job. Read about our full waterproofing service or browse all our work in Martin County.

Planning ahead

How to plan a waterproofing project in Martin County

Diagnosis comes before design. An association should expect leak tracing, targeted water tests and a written scope from the engineer or consultant tied to the confirmed cause, rather than a product recommendation on the first visit. Where an engineer's report also calls out cracked stucco or spalled concrete, those repairs go into the same project, since waterproofing over unsound material fails early. The engineer or consultant specifies the systems, and the City of Stuart or another municipal building official, or the Martin County Building Department for unincorporated areas, permits work that affects the structure or envelope.

Replacement windows, doors and other envelope products need a Florida product approval that meets the design pressures of the building, and the building official reviews it with the permit. Martin County is outside the High-Velocity Hurricane Zone, though some engineers specify HVHZ-approved products anyway. The calendar is built around weather: coatings and sealants go on clean, dry surfaces in areas that can be completed the same day, and when a tropical storm is forecast, loose materials and open work areas are secured.

How we run a job

Site walk first, closed permit last.

  1. 01

    Meet on site

    Each job starts on site, walking the property and its conditions with your manager, board or engineer.

  2. 02

    Follow the engineer's scope

    The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.

  3. 03

    Put safety first

    We can never work too safely: shoring, swing stages, barricades and notices go up first.

  4. 04

    Build the repairs

    Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.

  5. 05

    Finish and document

    Final inspections, a closed permit and a full record of the work for the association.

Ready for a site visit?Tell us where the building is and what you are seeing. We will set up a time to walk it.

Cities served

Waterproofing throughout Martin County

Summary

What Martin boards and owners should remember

  • 01

    Rusting railing anchors on Martin County oceanfront balconies crack the slab and open new leak paths.

  • 02

    Failed membranes under pool decks and planters leak into the garage level below.

  • 03

    A confirmed leak source and the engineer's written scope should come before any membrane is chosen.

  • 04

    Envelope products in Martin County need a Florida product approval reviewed with the permit.

Questions

Waterproofing in Martin: questions we hear

Why does our Stuart riverfront building keep leaking at the same windows after each repair?

Repeated leaks at one window often mean the repairs treated the symptom rather than the source. Caulking the inside of the frame does not stop water entering at a cracked sill, a failed joint above the window or an open stucco crack nearby. A water test can isolate the true entry point, and the repair is then written to fix that point.

Can breezeways on a Jensen Beach condominium be coated while residents use them?

Yes, in most cases. Breezeways are worked in short lengths with a marked path around the active area, and products are chosen so each section can take foot traffic again quickly. Doors to units stay accessible throughout. The coating is selected for slip resistance and foot traffic as well as for sealing the slab underneath.

What should a Hobe Sound board plan for when waterproofing a pool deck?

Pool deck membranes usually sit under the pavers or topping, so the finish often has to be lifted to reach and replace them. Drains, planters and expansion joints are typically rebuilt at the same time. The engineer or consultant sets the extent, and the work is scheduled outside the busiest pool season when the board prefers.

Is it worth testing for leaks before we replace sealant on a Stuart condominium?

Usually, yes. Testing confirms whether the sealant is actually the problem or whether water is getting in through a sill, a crack or a balcony threshold nearby. Commercial waterproofing in Martin County holds up longer when the scope targets that confirmed source rather than every joint at once.

Does a waterproofing project in Palm City need a permit?

Simple maintenance such as resealing some joints may not, while membranes over occupied space, window replacement and repairs tied to an engineer's report generally do. For unincorporated areas like Palm City, the Martin County Building Department decides. We confirm with the right office before the work starts.

How often should a Jupiter Island building be repainted to keep water out?

Paint is the outer waterproofing layer, and on the coast we suggest repainting about every 7 to 10 years, sooner on faces that take the most sun and salt. Cracked stucco and failed sealant are repaired before the new coating goes on, and color overlays let the board compare schemes before choosing one.

Laws and rules cited

Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.

Working with an engineer?

Holding drawings, specifications or a complete set of bid documents?

Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.

Request an estimate

Let's plan your restoration.

Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.

  • More than 20 years in the field
  • St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
  • Family-owned Certified General Contractor

Rather call?(954) 718-3094

Work needed (choose all that apply)
Call Request an estimate