Broward County, Florida
Concrete Restoration in Broward County
Spalled concrete and rusted rebar, fixed exactly as your engineer specifies.
In short
Who handles concrete restoration in Broward?
From our Pompano Beach office, SERPE-CO handles concrete restoration in Broward County for condo associations, hotels and commercial owners, with more than 20 years in the field as a family-owned Certified General Contractor. Our crews sound each surface, chip out spalled concrete, clean or replace rusted rebar and rebuild every slab, beam and column to the details your licensed engineer issues.
Free milestone planner
Is a milestone inspection coming due on your building?
Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.
Add the year and story count for an estimated due date.
Want a second look at your timeline? Send your building details and SERPE-CO will follow up about the inspection, likely repairs and how to plan for them.
About this estimate
This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.
Concrete Restoration · Broward
Salt is behind most concrete restoration in Broward County. Ocean air carries chlorides into the slab, they reach the reinforcing bars, and the rusting steel swells until the concrete on top of it cracks, separates and falls away. SERPE-CO cuts out the broken concrete, cleans the bars or replaces them, coats them to slow new corrosion and rebuilds the member with repair mortar or formed and poured concrete, always to the details the owner's engineer issues.
Our crews do this on columns, beams, slabs, shear walls, stair towers and balcony edges at condominiums, hotels, garages and commercial buildings. Some jobs are a handful of spalls uncovered while a building is being painted. Others are whole-building programs driven by an inspection report. Either way we chase the damage back to sound concrete, open the steel all the way around, rebuild the section and protect it so the spot holds up.

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974
Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.


Local conditions
What salt air does to concrete on the Broward coast
Few places in Florida have as many older oceanfront high-rises packed together as the beaches of Hallandale, Hollywood, Fort Lauderdale and Pompano. Plenty of the buildings on the Galt Ocean Mile and along the Hollywood and Hallandale Beach shoreline went up in the 1960s and 1970s, with less concrete covering the bars and more porous mixes than engineers specify now. Years of spray from the Atlantic and damp Intracoastal air have driven chlorides deep into them.
Broward's Building Safety Inspection Program puts that damage on a calendar. A building gets a structural and electrical inspection at 25 years old and again every 10 years, and the engineer's report spells out what has to be fixed. Buildings on a second or third round usually need old patches that have let go removed, plus the fresh corrosion next to them. Fix only the spall you can see and the rust keeps working at its edge.
Buildings that need this work
Where concrete damage shows up across Broward
The heaviest repair work in Broward sits on the oceanfront along A1A, running south from the Hillsboro Mile past Pompano Beach, Fort Lauderdale and Hollywood to Hallandale Beach. On those towers we usually find spalled columns in open ground-floor parking, rusted slab edges on the east elevation, cracked landings in the stair towers and worn roof slabs beneath mechanical equipment. Mid-rise buildings along the Intracoastal Waterway carry the same kind of damage on their water side, most often at pool decks, columns near the seawall and exposed beams.
A second group of buildings sits inland: the 55-plus communities of three and four stories in Margate, Tamarac, Deerfield Beach, Sunrise, Lauderhill and Pembroke Pines. Residents get to their front doors along open catwalks and exterior stairs, and years of rain sitting on those flat walkways has rusted the steel along walkway edges, at stair landings and at the bottoms of columns. West of I-95 salt matters less, but because the walkways are the only path in and out, SERPE-CO phases those repairs around the foot traffic residents depend on every day.
The work
Concrete restoration in Broward County: what the job covers
- 01Repair of spalled or delaminated slabs, beams, columns and walls
- 02Rebar cleaned, coated, spliced or replaced
- 03Epoxy injection for structural crack repair
- 04Overhead, hand-placed and form-and-pour repair mortars
- 05Temporary shoring while repairs are underway
- 06Protective coatings, sealers and corrosion-inhibiting treatments

Our approach
Our process on Broward buildings people live in
First we sound the surfaces. A crew taps each area, marks the hollow spots and gives the engineer quantities to confirm before anyone starts chipping. We use light pneumatic hammers so good concrete is not damaged and clear the bars on every side. When a bar has lost more section than the engineer permits, a new one is spliced in. Before any slab, beam or column is opened, shoring goes in.
With residents at home, we work one stack or one elevation at a time, cover walkways and doors below the drop, and keep dust and slurry contained. Loud work stays inside the hours set by the city and the association, because safety and the residents come first. The engineer checks the open steel before every pour, and we log photos and quantities at each repair for the board's records and the permit closeout.
SERPE-CO brings more than 20 years in the field to every job. Read about our full concrete restoration service or browse all our work in Broward County.
Planning ahead
How we plan concrete repairs with a Broward board
Every Broward concrete project begins with the engineer's report and a signed and sealed set of repair documents, since the city building department will not issue a permit without them. The quantities listed in that report are estimates. Damaged concrete under paint or tile stays hidden until sounding and chipping start, so the engineer measures and approves the real quantities as the job moves along. Boards should hold some contingency in reserve for areas that end up larger than the survey showed.
Broward weather drives the concrete calendar. From mid-May to mid-October the South Florida rainy season brings afternoon storms nearly every day, which interrupt pours and slow curing, and hurricane season covers June 1 to November 30. Each time a storm threatens, we lower and secure swing stages, scaffolding and loose material, and production stops for several days. Many associations also want the loudest chipping done in summer while seasonal residents are away, so the schedule ends up balancing noise against rain, with crew safety settled first.
How we run a job
Site walk first, closed permit last.
- 01
Meet on site
Each job starts on site, walking the property and its conditions with your manager, board or engineer.
- 02
Follow the engineer's scope
The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.
- 03
Put safety first
We can never work too safely: shoring, swing stages, barricades and notices go up first.
- 04
Build the repairs
Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.
- 05
Finish and document
Final inspections, a closed permit and a full record of the work for the association.
Cities served
Concrete Restoration throughout Broward County
Summary
What Broward boards and owners should remember
- 01
Oceanfront towers on A1A carry Broward's worst concrete damage, mostly at stair towers, parking-level columns and east-facing slab edges.
- 02
Inland 55-plus communities like Margate, Tamarac and Lauderhill see most of their damage at column bases, stair landings and catwalks.
- 03
The local city building department issues the repair permit after reviewing the engineer's signed and sealed documents.
- 04
The engineer confirms actual repair quantities as work goes on, so a Broward board should set aside a contingency.
Questions
Concrete Restoration in Broward: questions we hear
What are the signs our Fort Lauderdale building may need concrete restoration?
Look for rust bleeding through the paint, straight cracks that follow a bar, chunks of concrete that are loose or already on the ground, and spots that sound hollow when tapped. A licensed engineer decides how far the damage goes and writes the specification for the repair. Already have a report? Send it over and one of us will walk the property with you.
Do concrete repairs on a Broward County building need a permit?
Yes. The engineer prepares signed and sealed repair documents, and the permit is pulled through the building department of whichever city the property is in. SERPE-CO files the application, books the required city inspections and lines up the engineer's own visits at every stage so nothing gets missed along the way.
Why do earlier repairs keep failing on towers in Hollywood and Hallandale Beach?
Earlier patches usually let go for one of three reasons: rusted steel was never fully cleaned and exposed, the repair material never bonded, or salty concrete was left in place beside it. Once that happens the patch and the old concrete set up a corrosion cell along the edge. Good prep, steel treatment and waterproofing on top keep it from repeating.
Do Pompano Beach condo owners have to move out during concrete repairs?
Usually not. Whether the building stays occupied is the engineer's call, and the engineer may confirm that in writing for the building official. We phase the work by stack or by elevation, shore the structure wherever concrete is opened, and keep entrances, walkways and parking under each drop protected. Residents give up the area being repaired for a while, not their home.
What happens when a Broward County concrete job uncovers more damage than expected?
At the start of each phase, sounding shows how far the damage really goes. The engineer looks at the marked areas, measures them and signs off on the quantity before chipping continues. During concrete restoration in Broward County, SERPE-CO photographs and measures every location, so the board can see what was added, where it was and who approved it.
Why do inland Broward County buildings far from the ocean still get concrete damage?
Water does the damage, just more slowly than salt. Rain that ponds on stair landings, balconies and flat catwalks works into the concrete, and over decades the slab loses the alkaline shield around its rebar. Cracks carry water straight to the steel. Sunrise, Tamarac and Pembroke Pines communities show it most at walkway edges and column bases.
Laws and rules cited
- Broward County Board of Rules and Appeals Policy 05-05: Building Safety Inspection Program
- Florida Statute 553.899: mandatory structural inspections for condominium and cooperative buildings
- Florida Statute 718.112: structural integrity reserve studies
Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.
Working with an engineer?
Holding drawings, specifications or a complete set of bid documents?
Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.
Request an estimate
Let's plan your restoration.
Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.
- More than 20 years in the field
- St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
- Family-owned Certified General Contractor
Rather call?(954) 718-3094