Miami-Dade County, Florida
General Contractor in Miami-Dade County for Restoration and Capital Projects
A single contractor answering for the trades, the timeline and the finished result.
In short
Who handles general contractor in Miami-Dade?
SERPE-CO is a family-owned general contractor in Miami-Dade County, Florida Certified General Contractor CGC #1523974, managing restoration and capital projects for condominium associations and commercial owners. The work involves one contract and one schedule covering structural repair, waterproofing, stucco and paint, railings, impact openings and the permits and inspections, with licensed specialty contractors under SERPE-CO's management.
Free milestone planner
Is a milestone inspection coming due on your building?
Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.
Add the year and story count for an estimated due date.
Want a second look at your timeline? Send your building details and SERPE-CO will follow up about the inspection, likely repairs and how to plan for them.
About this estimate
This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.
General Contracting · Miami-Dade
A general contractor in Miami-Dade County running a building restoration is responsible for far more than concrete. A typical project brings together structural repair, waterproofing, stucco and paint, railings, impact windows and doors, roofing, electrical corrections and a permit and inspection trail for each one. SERPE-CO is a family-owned Florida Certified General Contractor, CGC #1523974, and we hold one contract, run one schedule and coordinate every trade from mobilization to the final inspection.
Restoration is only part of what SERPE-CO builds. Commercial renovations, structural modifications, capital improvement projects and recurring maintenance programs for buildings and communities are also part of the work. Our own crews handle the concrete and the building envelope, and licensed specialty contractors, such as electricians, work under our management, so the owner has one company, one point of contact and one set of records.

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974
Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.


Local conditions
Why Miami-Dade projects need one accountable contractor
The county recertification program looks at structural and electrical conditions together, and it also checks parking lot lighting and, at lots beside water, guardrails. One report can therefore call for concrete repair, railing work, electrical corrections and site items at the same time, each by a different trade. When a single contractor sequences that work, the repairs move in a sensible order and the engineer has one party to answer to.
Miami-Dade has 35 municipalities, and the county notes that each municipality's building official has jurisdiction over permits, inspections and recertification within its limits, while the county handles unincorporated areas. A project in Miami Beach runs through a different permit office and review process from one in Coral Gables or Doral. Knowing how each office works is part of keeping the schedule.
Buildings that need this work
Which Miami-Dade properties hire a general contractor for restoration
Coastal condominium towers are the largest group. In Sunny Isles Beach, Bal Harbour, Surfside, Miami Beach and Key Biscayne, a recertification report or a planned facade project often combines concrete repair, balcony waterproofing, new railings, impact doors, roof work and repainting on one building. Those trades share swing stages, overlap on the same balconies and depend on each other's sequence, so boards look for a single contractor that holds the schedule and answers to the engineer.
Commercial and mixed-use owners make up the second group. Office buildings in Coral Gables and Miami, shopping centers along the main corridors, hotels on the beach and industrial buildings in Doral all need capital work planned around tenants and operating hours. In Coral Gables, exterior changes may also go before the city's Board of Architects for design review, which adds a step to the schedule that a general contractor needs to plan for from the start.
The work
General contractor in Miami-Dade County: what the job covers
- 01Commercial build-outs and general construction
- 02Capital improvement and building renovation work
- 03Coordinating roofing and roof repairs
- 04Permits, scheduling and trade coordination
- 05Site assessments, consultation and budget planning
- 06Long-term maintenance programs for communities and buildings

Our approach
How we manage a multi-trade project on an occupied property
We build one master schedule from the engineer's documents and sequence the trades by elevation or area: structural repair first, then waterproofing, then openings and railings, then stucco and paint. Swing stages and other access are shared between trades where possible so they come down sooner. Long-lead items, especially railings and impact units, are ordered as soon as approvals allow. Where a phase needs a lane closure, a crane or work outside normal hours, those permits are requested early, because each city sets its own rules for them.
The board and manager receive regular written updates with photos, upcoming closures, quantity changes confirmed by the engineer and decisions that need the association. Residents are notified before work affects their stack, parking or an amenity. At the end we close every permit, collect the engineer's sign-off and hand over a complete record of the work for the association's files.
SERPE-CO brings more than 20 years in the field to every job. Read about our full general contracting service or browse all our work in Miami-Dade County.
Planning ahead
Planning a restoration program with a Miami-Dade board
After the site walk and review of the engineer's or architect's documents, SERPE-CO prices the scope line by line and prepares a master schedule showing each trade, each phase and the access equipment required. Permit submittals go to the building official for the city where the property sits, or to the county for unincorporated land, as early as the documents allow. Long-lead materials, such as railings and impact units with current Notices of Acceptance, are ordered once approved.
During construction the board or owner gets regular written progress reports with photos, upcoming work and any changes confirmed by the engineer. A SERPE-CO supervisor is on site whenever crews are working, and the property is cleaned daily. Safety is planned before the first cut, because we can never work too safely around residents and the public. At completion we obtain final inspections, close the permits and hand over the full project record.
How we run a job
Site walk first, closed permit last.
- 01
Meet on site
Each job starts on site, walking the property and its conditions with your manager, board or engineer.
- 02
Follow the engineer's scope
The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.
- 03
Put safety first
We can never work too safely: shoring, swing stages, barricades and notices go up first.
- 04
Build the repairs
Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.
- 05
Finish and document
Final inspections, a closed permit and a full record of the work for the association.
Cities served
General Contracting throughout Miami-Dade County
Summary
What Miami-Dade boards and owners should remember
- 01
A Miami-Dade recertification report can combine structural, electrical and site items, which one general contractor can sequence.
- 02
Each of the 35 municipalities in Miami-Dade has its own building official, and the county handles unincorporated areas.
- 03
Coral Gables may route exterior design changes through its Board of Architects, which belongs in the schedule.
- 04
Boards get one contract, one schedule and one point of contact, with regular written reports and photos.
Questions
General Contracting in Miami-Dade: questions we hear
Who pulls the permits for a restoration project in Miami or Miami Beach?
SERPE-CO does, as the general contractor. Your engineer supplies signed and sealed repair drawings, and our office submits them to the city building department along with the application. We then book each municipal inspection and line those up with the engineer's own site visits. Property in unincorporated areas follows the same steps through the county.
Can one contractor take care of both the structural and electrical items in a Miami-Dade recertification report?
Yes. As general contractor, SERPE-CO performs the concrete, waterproofing and envelope work with our own crews and brings in a licensed electrical contractor for the electrical items. Everything runs under one schedule and one point of contact, and the engineer receives a single coordinated set of records.
Does SERPE-CO work on commercial properties in Miami-Dade that are not condominiums?
Yes. We work for commercial owners, industrial operators, hotels and developers on renovations, structural changes, floor and slab work, facade repair and capital improvements. The same planning applies: a written scope from the owner's engineer or architect, a phased schedule built around tenants and operating hours, and regular reporting to the owner.
How does SERPE-CO keep a Miami-Dade board informed during a long project?
We send written progress reports with photos on a regular schedule and hold update meetings on site or by video. Decisions that need board approval are presented with the engineer's input and a clear deadline. That keeps the project moving when directors are away or the board meets only monthly.
Do permit offices in Miami-Dade work the same way from city to city?
Each municipality's building official handles permits, inspections and recertification within the city, and the county handles unincorporated areas, so portals, submittal rules and review times differ. A general contractor in Miami-Dade County who files in many of these offices can plan for those differences and keep the schedule realistic.
Can SERPE-CO manage a project for a commercial property in Doral or Coral Gables?
Yes. We work for commercial owners, office properties, hotels and industrial operators as well as associations. Work is planned around tenants, customers and operating hours, with phasing, protected access and after-hours work where needed. One contract covers the trades the scope requires.
Laws and rules cited
- Miami-Dade County: Building Recertification (Milestone) Inspections, Code of Miami-Dade County Section 8-11(f)
- Miami-Dade County Product Control: Notice of Acceptance for building envelope products
- Florida Statute 553.899: mandatory structural inspections for condominium and cooperative buildings
- Florida Statute 718.112: structural integrity reserve studies
Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.
Working with an engineer?
Holding drawings, specifications or a complete set of bid documents?
Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.
Request an estimate
Let's plan your restoration.
Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.
- More than 20 years in the field
- St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
- Family-owned Certified General Contractor
Rather call?(954) 718-3094