Miami-Dade County, Florida
Impact Windows and Doors in Miami-Dade County
Hurricane-rated windows and doors set into properly repaired concrete openings.
In short
Who handles impact windows and doors in Miami-Dade?
SERPE-CO installs impact windows and doors in Miami-Dade County for condominium associations and commercial buildings. The work involves measuring every opening, submitting Miami-Dade Notices of Acceptance with the permit, removing old frames, repairing the concrete and stucco around each opening, and anchoring the new units with stainless steel fasteners set in a urethane hybrid sealant before sealing the perimeter.
Free milestone planner
Is a milestone inspection coming due on your building?
Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.
Add the year and story count for an estimated due date.
Want a second look at your timeline? Send your building details and SERPE-CO will follow up about the inspection, likely repairs and how to plan for them.
About this estimate
This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.
Impact Windows & Doors · Miami-Dade
Impact windows and doors in Miami-Dade County must meet the High-Velocity Hurricane Zone provisions of the Florida Building Code, which apply only here and in Broward. SERPE-CO replaces windows, sliding glass doors, storefronts and common-area entries on multi-story condominium and commercial buildings, and we repair the concrete and stucco around every opening before the new unit is set. Balcony and walkway railings are part of the same work when the board wants them done together.
The installation detail is where SERPE-CO takes extra care. Every unit is anchored with stainless steel fasteners, and each fastener is set in a urethane hybrid sealant so the screw never sits in bare contact with the concrete. Ordinary steel screws driven into salty, damp concrete rust, swell and crack the sill or jamb they were meant to hold. Sealing every fastener keeps water away from both the screw and the steel in the wall.

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974
Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.


Local conditions
Product approvals and openings on Miami-Dade buildings
Miami-Dade runs its own product approval system. The Product Control Section issues a Notice of Acceptance, or NOA, for building envelope products such as windows, exterior doors, shutters, skylights and roofing. Each NOA states the sizes, design pressures and anchoring the product is approved for, approved units carry a label reading Miami-Dade County Product Control Approved, and every NOA has an expiration date, so approvals are checked when the permit is submitted.
Coastal towers from Sunny Isles Beach through Bal Harbour, Surfside, Miami Beach and Key Biscayne carry the toughest exposure: full-height sliding doors to balconies, wide corner glass and lobby storefronts facing the ocean. Many still have original aluminum frames with pitted tracks and corroded anchors in the slab edge. Buildings on Biscayne Bay in Miami, Aventura and North Miami Beach have similar openings with somewhat less salt damage around the frames.
Buildings that need this work
Openings we replace on Miami-Dade buildings
Oceanfront towers from Sunny Isles Beach to Key Biscayne have the largest and most exposed openings: balcony sliders that run the width of the unit, tall fixed panes wrapping the corners and broad ground-floor lobby glass that faces the beach. Design wind pressure climbs with height and peaks near the corners, so a product that works on a low floor may not be rated for an upper corner unit on the same stack. Buildings along Biscayne Bay and the Intracoastal in Miami, Aventura and North Miami Beach have similar openings, usually with less salt damage at the frames.
Older low-rise and mid-rise condominiums across the mainland present a different mix: original awning or jalousie windows on the catwalk side, unit entry doors opening onto the walkway and sliding doors to small balconies or screened porches, with frames set in stucco over concrete block. Commercial work includes storefronts, entrances and lobby glazing at offices in Coral Gables and Doral, retail along the Biscayne Boulevard corridor and clinics and service buildings across the county. Shutters fall under the same product approval system, so boards weighing new impact glass often decide at the same time whether older accordion or roll-down shutters stay or come down.
The work
Impact windows and doors in Miami-Dade County: what the job covers
- 01Installing impact windows and sliding glass doors
- 02Common-area entries and storefront systems
- 03Repairs to sills, jambs and headers
- 04Perimeter sealants and waterproofing
- 05Stucco and finishes restored around each opening
- 06Phased building-wide replacement for associations

Our approach
Replacing openings in an occupied Miami-Dade building
Every opening is field measured, and the shop drawings and NOAs go in with the permit application. On installation day the old unit comes out, the opening is checked, and any concrete or stucco repair is finished before the new frame is set and anchored. Our crews plan each day so that no unit is left open overnight and openings are closed up whenever a storm is forecast.
Residents get a schedule by stack and floor, with clear instructions on moving furniture and blinds away from the work. Floors are covered along the route to each opening. After anchoring, the perimeter is sealed, the sill is tied into the balcony waterproofing where there is one, and the interior and exterior finishes around the frame are restored. The building department inspects the installation under the permit.
SERPE-CO brings more than 20 years in the field to every job. Read about our full impact windows & doors service or browse all our work in Miami-Dade County.
Planning ahead
Planning a building-wide opening replacement in Miami-Dade
A building-wide project in Miami-Dade starts with the condominium documents and a survey. The documents establish whether the association or each owner is responsible for openings, and the board adopts one specification for product line, frame color and glass so the facade stays uniform. Every opening is then measured, because real sizes vary more than the original drawings show. Products are chosen with current Notices of Acceptance, checked at permit time so no approval expires before the work is inspected.
Lead time and weather set the schedule. Impact units are manufactured only after the permit drawings clear review, which puts the purchase order months ahead of the first installation day. Crews open only as many openings as they can close the same day, and work pauses when a tropical system is forecast during hurricane season, June 1 to November 30. Many boards align window replacement with balcony repairs or repainting. Florida's structural integrity reserve study lists windows and exterior doors as a component where the association is responsible for them.
How we run a job
Site walk first, closed permit last.
- 01
Meet on site
Each job starts on site, walking the property and its conditions with your manager, board or engineer.
- 02
Follow the engineer's scope
The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.
- 03
Put safety first
We can never work too safely: shoring, swing stages, barricades and notices go up first.
- 04
Build the repairs
Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.
- 05
Finish and document
Final inspections, a closed permit and a full record of the work for the association.
Cities served
Impact Windows & Doors throughout Miami-Dade County
Summary
What Miami-Dade boards and owners should remember
- 01
Windows and doors in Miami-Dade need a product approval valid for the High-Velocity Hurricane Zone, normally a Miami-Dade NOA.
- 02
Every NOA carries an expiration date, so approvals are checked when the permit is submitted.
- 03
SERPE-CO anchors every unit with stainless steel fasteners set in urethane hybrid sealant so screws never touch bare concrete.
- 04
Upper floors and corner units on Miami-Dade oceanfront towers can require higher-rated products than lower floors.
Questions
Impact Windows & Doors in Miami-Dade: questions we hear
What approval do impact windows need in Miami-Dade?
Miami-Dade is in the High-Velocity Hurricane Zone. Windows and doors installed here need a product approval valid for that zone, normally a Miami-Dade Notice of Acceptance from the Product Control Section, and the anchoring has to follow that approval exactly. The building department reviews the approvals with the permit, and an expired NOA cannot be used.
Why does SERPE-CO use stainless steel fasteners and seal each one?
Concrete near the coast holds salt and moisture, and plain steel screws in that concrete corrode, expand and crack the opening around them. Stainless steel resists that corrosion, and setting each fastener in a urethane hybrid sealant keeps the screw from touching bare concrete and blocks water from following the fastener into the wall.
Should a Miami Beach condominium replace its sliding doors before or after balcony repairs?
The safest order is to replace the doors during the balcony project or just after it. Balcony repairs often rebuild the slab edge and threshold under the door, and the new sill needs to join the balcony membrane cleanly. Doors set first can be scratched or cracked by chipping nearby, and the threshold is left without a finished waterproofing detail.
Why do corner units in a Sunny Isles Beach tower need different windows from lower floors?
Design wind pressure increases with height and is higher at the corners of a building. Each Notice of Acceptance lists the pressures and sizes a product is approved for. An engineer calculates the pressure at every opening, and each unit is matched to a product rated at or above that figure and anchored as its approval requires.
Can individual owners in a Miami Beach or Aventura building replace their own windows?
The condominium documents decide who is responsible for windows and doors and what standards owners must follow. Many associations adopt a building-wide specification for product, color and installation method so the facade looks consistent and the perimeter waterproofing is the same at every unit. The building department still requires a permit for each replacement.
How long does a window and door replacement take in a Miami-Dade condominium?
The longest stretch comes before anyone touches a frame: the opening survey, shop drawings, the permit review and the factory run. After delivery, crews complete a set number of openings each day, stack by stack. For impact windows and doors in Miami-Dade County we publish a calendar by unit, so each owner can plan around the day their openings are replaced.
Laws and rules cited
- Miami-Dade County: Building Recertification (Milestone) Inspections, Code of Miami-Dade County Section 8-11(f)
- Miami-Dade County Product Control: Notice of Acceptance for building envelope products
- Florida Statute 553.899: mandatory structural inspections for condominium and cooperative buildings
- Florida Statute 718.112: structural integrity reserve studies
Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.
Working with an engineer?
Holding drawings, specifications or a complete set of bid documents?
Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.
Request an estimate
Let's plan your restoration.
Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.
- More than 20 years in the field
- St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
- Family-owned Certified General Contractor
Rather call?(954) 718-3094