(954) 718-3094 Request an estimate

Miami-Dade County, Florida

Concrete Restoration in Coral Gables

Structural repair, stucco and coatings for Coral Gables condominiums, office towers and garages, with exterior work planned around the city's design review.

In short

Who repairs concrete in Coral Gables?

SERPE-CO is a Florida Certified General Contractor that performs concrete restoration in Coral Gables on condominiums, office buildings, parking garages and mixed-use properties. The work covers spalled concrete, corroded reinforcing steel, stucco, waterproofing and coatings, all built to a licensed engineer's or architect's documents and permitted through the city Building Division.

Free milestone planner

Is a milestone inspection coming due on your building?

Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.

Building type

Add the year and story count for an estimated due date.

About this estimate

This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.

Coral Gables

Concrete restoration in Coral Gables often comes with an extra layer of care, because the city pays close attention to how its buildings look. SERPE-CO repairs the structure first, then restores stucco, trim and color so the finished building fits its street. Our work here includes condominium and apartment buildings, office towers Downtown, parking garages and mixed-use buildings along the main corridors. As a family-owned firm with more than 20 years in the field, we build every repair to the documents of the owner's engineer or architect.

Coral Gables is a planned city with a strong architectural identity, mostly Mediterranean in style, and exterior changes go through design review. That affects color choices, railing designs, window replacements and any change to how a facade looks. The sections below describe the buildings in Coral Gables, the problems that send owners looking for a contractor and the inspection and permit process inside the city.

Brett Serpe, MBA, GC, CEO of SERPE-CO

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974

Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.

Concrete Restoration in Coral Gables by SERPE-CO

Summary

Coral Gables: quick facts

  • 01

    The City of Coral Gables Building Division mails recertification notices, and owners have 90 days to submit structural and electrical reports.

  • 02

    Exterior design changes in Coral Gables are reviewed by the city's Board of Architects.

  • 03

    Downtown Coral Gables, centered on Miracle Mile and Ponce de Leon Boulevard, holds most of the city's office towers and structured parking.

  • 04

    Coral Gables is in the High-Velocity Hurricane Zone, where windows, doors and roofing need an approval such as a Miami-Dade Notice of Acceptance.

  • 05

    In Coral Gables, SERPE-CO acts as the repair contractor, while the owner's licensed engineer or architect handles the inspection and the specification.

Local building stock

Where the larger buildings stand in Coral Gables

Downtown Coral Gables holds most of the city's office towers and many of its multifamily buildings, centered on Miracle Mile and Ponce de Leon Boulevard. Office buildings from several decades share the blocks with newer residential and mixed-use buildings, most of them served by structured parking. Public and private garages are spread through the business district, and many buildings have ground-floor retail with offices or apartments above.

Mid-rise condominiums and apartment buildings line the corridors around Downtown, including Coral Way, LeJeune Road and the streets near South Dixie Highway. Many are three to eight stories, with exterior stucco over concrete, decorative trim, balconies and courtyard pools. Their Mediterranean details, such as arches, columns, tile roofs and textured stucco, add character but also add joints and edges where water can get in.

To the south and east, the Coral Gables Waterway and the canals lead toward Biscayne Bay, and waterfront properties there have seawalls, docks and pool decks close to salt water. Most of the city is residential, with single-family neighborhoods that sit outside the recertification program. The larger condominium, office and commercial buildings are where structural repair work is concentrated. Many of them have tile roofs, decorative balustrades and recessed openings that have to be protected during the work and restored to their original look at the end.

Have a question about your building?Call the office or send a quick request. A real person answers.

Common failures and causes

Common repairs on Coral Gables buildings

Most of Coral Gables sits a few miles inland, so the main cause of concrete damage is water rather than direct ocean spray. Rain gets in through cracked stucco, failed sealant at windows and trim, flat roofs, balconies and courtyard decks, and over the years it reaches the steel inside slabs, beams and columns. Rust stains, bulging stucco and cracks along the line of a beam are the usual signs that the concrete under the finish needs attention.

Garages and plaza decks in the business district carry cars and rainwater every day, and expansion joints and traffic coatings wear out with time. Leaks through a garage deck reach the slab steel and drip onto the level below. Waterfront buildings near the Coral Gables Waterway and the bay add salt to the picture, with damage showing first at seawall caps, pool decks and ground-floor columns closest to the water. Heavy tree canopy on many Gables streets also keeps walls and walkways shaded and damp, so mildew and coating failure are common on the north and shaded sides of a building.

Services

Concrete Restoration in Coral Gables: our scope of services

Concrete Restoration

Repairs to slabs, beams, columns and balconies on Coral Gables buildings follow the engineer's marked drawings. Crews remove damaged concrete to sound material, clean or replace the reinforcing steel and rebuild each section. Decorative features such as arches, cornices and column covers are protected or rebuilt so the facade looks the way it did once the repair is complete.

Stucco & Painting

Stucco and paint carry much of the character of a Coral Gables building. Hollow or cracked stucco is removed and replaced to match the existing texture, and the building is repainted with coatings from leading suppliers such as Benjamin Moore and Sherwin-Williams. Directors can study color overlays prepared on images of their own building, then send the chosen scheme on to design review.

Parking Garages & Plaza Decks

Garages in Downtown Coral Gables serve offices, shops and residents through the day. Repairs cover spalled slabs and beams, leaking expansion joints, cracked ramps and worn traffic coatings, and the work is phased by level or bay so the garage keeps operating. Lighting, striping and signage are restored once each area is repaired, and the next level only closes when the previous one is back in service.

Waterproofing

Leaks in Coral Gables buildings often start at decorative trim, window perimeters, flat roofs, balconies and courtyard decks. Waterproofing begins with finding the real entry point, then sealing joints, injecting cracks or installing new membranes. Paint itself is part of the waterproofing, so a facade program usually combines sealant replacement with new coatings.

Milestone & Recertification

When a recertification report lists repairs, SERPE-CO prices the engineer's scope, plans the phasing and schedule, applies for the permit with the Building Division and coordinates inspections with the engineer. Exterior items that change appearance are planned around design review so approvals and construction move in the right order.

Impact Windows & Doors

Window and door replacements in Coral Gables must carry an approval for the High-Velocity Hurricane Zone and fit the city's design standards. SERPE-CO repairs each opening first, and the new frame is anchored with stainless steel screws set in urethane hybrid sealant, which keeps metal off the concrete and stops rust before it starts.

Browse all our work in Miami-Dade County, or view the complete list of our services.

Inspections and permits

Recertification, design review and permits in Coral Gables

The City of Coral Gables Building Division administers recertification under the Miami-Dade County program. The city mails a Notice of Required Recertification along with courtesy notices ahead of time, and owners have 90 days after the notice to submit structural and electrical reports prepared by a Florida-registered engineer or architect. Parking lot guardrail and illumination certifications are part of a complete submittal. Single-family homes, duplexes and minor structures are exempt, and the building official confirms the cycle that applies to each property.

Exterior changes in Coral Gables are reviewed by the city's Board of Architects, so new colors, railings, windows and facade changes should be planned with that review in mind. Condominium towers with three habitable stories or more must also meet the state milestone law, Florida Statute 553.899, and the reserve study rules of Florida Statute 718.112. Coral Gables is in the High-Velocity Hurricane Zone, where windows, doors and roofing need an approval such as a Miami-Dade Notice of Acceptance. SERPE-CO carries out the repairs; licensed professionals inspect.

Around Coral Gables

Neighborhoods and corridors we cover

  • Downtown Coral Gables
  • Miracle Mile
  • Ponce de Leon Boulevard
  • Coral Way
  • LeJeune Road
  • South Dixie Highway
  • Coral Gables Waterway
Ready for a site visit?Tell us where the building is and what you are seeing. We will set up a time to walk it.

How we run a job

From the first site visit to a closed permit.

  1. 01

    Meet on site

    Each job starts on site, walking the property and its conditions with your manager, board or engineer.

  2. 02

    Follow the engineer's scope

    The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.

  3. 03

    Put safety first

    We can never work too safely: shoring, swing stages, barricades and notices go up first.

  4. 04

    Build the repairs

    Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.

  5. 05

    Finish and document

    Final inspections, a closed permit and a full record of the work for the association.

Questions

Questions we hear in Coral Gables

Do concrete repairs in Coral Gables need design review?

Structural repairs that restore a building to its existing appearance are handled through the building permit. Changes to how the outside looks, such as new colors, railings, windows or facade details, are reviewed by the city's Board of Architects. Planning those items early keeps approvals from holding up construction, and the city confirms what needs review.

How much time does a Coral Gables owner have to submit recertification reports?

The Building Division mails a Notice of Required Recertification, and owners have 90 days after the notice to submit the structural and electrical reports. Courtesy notices go out ahead of time, which gives associations a chance to hire an engineer early. The building official can explain extensions and what a complete submittal includes.

Who handles concrete repairs on condominiums along Coral Way and LeJeune Road?

Repairs start with the association's engineer or architect, who examines the property and prepares the repair documents, and then a licensed contractor builds them. SERPE-CO provides concrete restoration in Coral Gables as that contractor, covering balconies, walkways, columns, stucco and coatings, with the permit issued by the city Building Division.

Can SERPE-CO match the stucco texture on an older Coral Gables building?

Yes. Matching texture and profile is part of the work on Mediterranean-style buildings. Crews study the existing finish, prepare sample areas for the board and the architect to review, and then apply the repair to match. The building is usually repainted afterward so new and old stucco read as one surface.

Does SERPE-CO repair office building garages in Downtown Coral Gables?

Yes. Garage restoration in the business district covers slab and beam repairs, expansion joints, crack injection and new traffic coatings. The work is phased so tenants and visitors can keep parking, and the phasing is agreed with building management before any level is closed.

Laws and rules cited

Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.

Working with an engineer?

Holding drawings, specifications or a complete set of bid documents?

Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.

Request an estimate

Let's plan your restoration.

Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.

  • More than 20 years in the field
  • St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
  • Family-owned Certified General Contractor

Rather call?(954) 718-3094

Work needed (choose all that apply)
Call Request an estimate