(954) 718-3094 Request an estimate

Palm Beach County, Florida

Concrete Restoration in Riviera Beach

Repairs for the concrete of a working waterfront: condominiums on the lagoon, port and marina buildings, warehouses and the storefront blocks of Broadway.

In short

Who repairs concrete in Riviera Beach?

SERPE-CO handles concrete restoration in Riviera Beach as the contractor, not the engineer. Our crews repair spalled slabs, rusted reinforcing, balconies, warehouse floors and parking decks, following the owner's licensed engineer's specification. We cut out bad concrete, clean or replace the steel, rebuild the section and seal it with waterproofing or a coating under a City of Riviera Beach permit.

Free milestone planner

Is a milestone inspection coming due on your building?

Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.

Building type

Add the year and story count for an estimated due date.

About this estimate

This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.

Riviera Beach

Riviera Beach curls around the Port of Palm Beach, and its whole eastern side looks out on the Lake Worth Lagoon. SERPE-CO provides concrete restoration in Riviera Beach for the full range of property that geography produces: homes and condominiums by the water, the city marina district, shops on Broadway and Blue Heron Boulevard, and warehouses and distribution space to the west. Every type breaks down differently, and every repair starts with a scope from a licensed engineer.

Owners in Riviera Beach tend to reach out to us for one of three reasons. An engineer's report has listed structural items, someone has noticed loose concrete overhead, or a leak keeps coming back after every patch. SERPE-CO, a family firm with more than 20 years in the field, steps in as the contractor. The engineer or architect inspects and certifies. We handle demolition, steel treatment, new concrete, permitting and the finished surface.

Brett Serpe, MBA, GC, CEO of SERPE-CO

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974

Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.

Concrete Restoration in Riviera Beach by SERPE-CO

Summary

Riviera Beach: quick facts

  • 01

    The Port of Palm Beach sits within Riviera Beach city limits, on the Lake Worth Lagoon across from the Lake Worth Inlet.

  • 02

    Most of Singer Island belongs to Riviera Beach, with the Lake Worth Lagoon separating it from the mainland side of the city.

  • 03

    Riviera Beach is a Palm Beach County city, outside the High-Velocity Hurricane Zone that applies to Miami-Dade and Broward.

  • 04

    In Riviera Beach, condominium buildings with three or more habitable stories are covered by Florida Statute 553.899, and the city building official enforces it.

  • 05

    SERPE-CO works in Riviera Beach as the repair contractor, building concrete repairs from the documents of the owner's licensed engineer.

Local building stock

Riviera Beach building types and where they stand

The city of Riviera Beach dates its incorporation to 1922, and it spread out from the lagoon shore. Broadway, the local name for US Highway 1, carries the oldest commercial blocks, along with the blocks near the municipal marina, where newer public buildings have gone up in the redeveloped Marina Village district. Residential buildings in the low-rise and mid-rise range stand near the mainland shoreline, many built of concrete frame or block with open walkways and stairs.

Riviera Beach contains the Port of Palm Beach, and the port shapes the land nearby. Cargo yards, a power plant, marine trades and older industrial buildings run from the port to President Barack Obama Highway, the city's new name for its stretch of Old Dixie Highway. West along Blue Heron Boulevard, block and tilt-wall warehouses run toward Interstate 95 and Military Trail, and the city continues past the interstate into newer industrial parks.

Over the Blue Heron Bridge, the larger part of Singer Island is also Riviera Beach, and its oceanfront towers are covered on a separate page of our site. Mainland concrete is a broader mix: slab-on-grade floors and loading aprons, apartments over ground-floor shops, churches and schools, docks and waterfront restaurants by Phil Foster Park, plus the garden-style condominiums that went up after the Second World War.

Have a question about your building?Call the office or send a quick request. A real person answers.

Common failures and causes

What breaks down concrete in Riviera Beach

Riviera Beach buildings get their salt from two places: the lagoon itself and the Lake Worth Inlet, the Atlantic opening directly across the water from the port. The chlorides land on walkway edges, stair landings and columns, rain drives them into the concrete, and in time they reach the steel. As the bars rust they expand and crack the cover off. Lagoon-front residential buildings usually show it first at slab edges, railing pockets and stair undersides.

Warehouse and industrial floors in Riviera Beach wear out more from use than from chemistry. Forklifts break down unarmored joints, concentrated loads crack slabs that were poured too thin, and soft subgrade leaves panels that rock underfoot. Trailer landing gear punches into loading aprons. The older block and tilt-wall buildings near the port carry a salt load on top of that, with rust stains around embedded connections and stucco cracks that let blowing rain into the wall.

Services

Concrete Restoration in Riviera Beach: our scope of services

Concrete Restoration

Most of what we do in Riviera Beach is spall and delamination repair. The crew sounds the concrete, lays out the repair limits with the engineer, saw-cuts the edges and chips back past the bars to sound material. The steel is cleaned and coated, then the section is rebuilt with repair mortar or a formed pour. On lagoon-side buildings that usually means columns, beams, walkway slabs and stair landings.

Industrial Floors

Floors in warehouses by the port and along Blue Heron Boulevard and Military Trail have to stay level under forklift traffic and racking. SERPE-CO cuts out and replaces failed panels, fills rebuilt joints with semi-rigid material, steadies rocking slabs, repairs dock edges and loading aprons, and pours new slabs for additions. We phase the work so a Riviera Beach tenant keeps part of the floor in operation.

Balconies & Railings

Many older residential buildings in Riviera Beach have walkways and balconies that were poured dead flat, so rain collects at the edge and around each railing post. SERPE-CO rebuilds those edges, pitches the surface toward the drains or the outer face, replaces rusted post pockets, installs new aluminum railings and finishes with a walkable waterproof membrane or deck coating built for daily foot traffic.

Waterproofing

Water getting into a Riviera Beach building usually comes through old sealant joints, cracked stucco, a flat walkway or a planter set against a wall. SERPE-CO finds where the water actually enters before sealing anything. From there we replace joint sealants, put down deck and below-grade membranes and coat exposed concrete. Structural repairs come first, so the new waterproofing goes over sound concrete.

Milestone & Recertification

A phase one or phase two report tells a Riviera Beach association what needs fixing, but the engineer still has to write the scope, and a contractor has to price it, permit it and build it. SERPE-CO reviews the engineer's report, walks the property with the board and manager, pulls the city permit, sequences the job by elevation or stack and stays with it through the engineer's final review. The engineer inspects, and we build to the report.

Commercial Roofing

Roofing on the Riviera Beach mainland takes in low-rise and mid-rise residential buildings by the Lake Worth Lagoon, apartments above shops on Broadway, churches and schools, and the block and tilt-wall warehouses around the Port of Palm Beach and on Blue Heron Boulevard. We install systems carrying Florida Product Approval, built to the consultant's specification, pull the city permit and fix the concrete deck underneath.

Browse all our work in Palm Beach County, or view the complete list of our services.

Inspections and permits

Riviera Beach permits and milestone inspections

Under Florida Statute 553.899, condominium and cooperative buildings that have three or more habitable stories must be inspected by December 31 of the year they turn 30, then once every 10 years. The statute allows the local enforcement agency to move that first inspection up to 25 years when conditions such as closeness to salt water call for it. For buildings in Riviera Beach, the city building official issues the notice and confirms the applicable date.

Palm Beach County does not run one recertification program for the whole county, and its Building Division covers milestone inspections in unincorporated areas only. Riviera Beach buildings report to the city instead. Structural concrete repair in the city requires a permit, usually filed with the engineer's signed and sealed repair drawings. The High-Velocity Hurricane Zone is limited to Miami-Dade and Broward, so in Palm Beach County the standard Florida Building Code governs new railings, windows and doors.

Around Riviera Beach

Neighborhoods and corridors we cover

  • Marina Village
  • Broadway corridor (US Highway 1)
  • Blue Heron Boulevard
  • Port of Palm Beach district
  • President Barack Obama Highway corridor
  • Park Manor
  • Military Trail corridor
  • Phil Foster Park
  • Singer Island
Ready for a site visit?Tell us where the building is and what you are seeing. We will set up a time to walk it.

How we run a job

From the first site visit to a closed permit.

  1. 01

    Meet on site

    Each job starts on site, walking the property and its conditions with your manager, board or engineer.

  2. 02

    Follow the engineer's scope

    The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.

  3. 03

    Put safety first

    We can never work too safely: shoring, swing stages, barricades and notices go up first.

  4. 04

    Build the repairs

    Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.

  5. 05

    Finish and document

    Final inspections, a closed permit and a full record of the work for the association.

Questions

Questions we hear in Riviera Beach

Which contractor repairs building concrete in Riviera Beach?

SERPE-CO. We are the repair contractor, and we handle concrete restoration in Riviera Beach for owners of every building type. The owner's licensed engineer or architect writes the scope, and our crews build it: removing unsound concrete, treating the steel, placing new concrete, then waterproofing. We are a family firm with more than 20 years in the field.

Is there a separate recertification program in Riviera Beach?

We found no separate city program. Riviera Beach follows Florida Statute 553.899, the state milestone law for condominium and cooperative buildings with three or more habitable stories. The city building official administers it and sets each property's date. Call the building official to confirm your deadline before you plan repairs around it.

Does the High-Velocity Hurricane Zone include Riviera Beach?

No. Only Miami-Dade and Broward counties make up the High-Velocity Hurricane Zone. Riviera Beach lies in Palm Beach County, where the general Florida Building Code provisions cover structural repairs, railings and replacement windows and doors. Your engineer sets the design loads, and we select products that match the approved drawings.

Will a Riviera Beach warehouse have to close while we fix the floor?

Usually not. We split slab replacement and joint work into sections so aisles, dock doors and racking elsewhere in the building stay usable. SERPE-CO works out the order with the owner or tenant ahead of time, keeps loud or dusty tasks away from busy hours where possible, and returns each area once the concrete reaches strength.

How can a Riviera Beach board spot early concrete damage on a waterfront building?

Watch for rust bleeding through the paint, straight-line cracks along a slab edge or a column corner, spots that sound hollow when you tap them, railing posts that wiggle and stains on ceilings under walkways. If you see any of these on a Riviera Beach building near the lagoon, have a licensed engineer take a look.

Laws and rules cited

Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.

Working with an engineer?

Holding drawings, specifications or a complete set of bid documents?

Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.

Request an estimate

Let's plan your restoration.

Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.

  • More than 20 years in the field
  • St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
  • Family-owned Certified General Contractor

Rather call?(954) 718-3094

Work needed (choose all that apply)
Call Request an estimate