Palm Beach County, Florida
Industrial Concrete Floors in Palm Beach County
Flat new slabs, joints built for forklift traffic and finishes made to last.
In short
Who handles industrial concrete floors in Palm Beach?
Warehouse, distribution, marine, aviation and manufacturing facilities rely on SERPE-CO for industrial concrete floors in Palm Beach County, both new and repaired. Our crews place slab-on-grade, replace failed panels, rebuild broken joints, repair cracks, grind and polish, and apply urethane or epoxy coatings, working zone by zone so the building stays in operation during the job.
Free milestone planner
Is a milestone inspection coming due on your building?
Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.
Add the year and story count for an estimated due date.
Want a second look at your timeline? Send your building details and SERPE-CO will follow up about the inspection, likely repairs and how to plan for them.
About this estimate
This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.
Industrial Floors · Palm Beach
Warehouses, distribution centers, marine and aviation shops, food and beverage plants and light manufacturers all depend on industrial concrete floors in Palm Beach County. SERPE-CO pours new slab-on-grade floors and swaps out failed panels, rebuilds joints and repairs cracks, grinds and polishes the concrete already in place, and applies epoxy or urethane coatings where a space needs chemical resistance or a continuous, washable finish.
The real test of a floor is the traffic running over it every day. Forklift drivers feel each broken joint. Narrow-aisle trucks need flatness. Food and pharmaceutical tenants need a washable floor that stays dust-free. Our first step is asking how the building is used and what the slab is doing wrong, and the answer points us toward repair, a surface treatment or new concrete.

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974
Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.


Local conditions
Where the county's industrial buildings are
Industrial buildings in the county follow Interstate 95 and the rail corridors. In Riviera Beach, near the Port of Palm Beach, tenants lean toward marine trades and port storage. West Palm Beach mixes older warehouse blocks with newer distribution space farther west. To the south, Boca Raton, Delray Beach and Boynton Beach have flex parks where warehouse, showroom and office uses share one building.
In Lake Worth Beach, Riviera Beach and West Palm Beach, plenty of buildings are decades old, and their slabs tend to be thin, randomly cracked and cut with joints nobody ever filled. Every new tenant means changes: patching old anchor holes and trenches, rebuilding joints to carry heavier equipment, then polishing or coating the surface. Down in the southern flex parks, owners often ask for polished concrete in showrooms and customer spaces.
Buildings that need this work
Industrial areas and the floor conditions common to each
The county's working waterfront is in Riviera Beach. Buildings at the marine yards on the Lake Worth Lagoon and around the Port of Palm Beach handle cargo, boat storage and repair, and their floors take hard-wheeled equipment, heavy point loads and salt water carried in on tires and boots. Crews typically find broken slab corners at dock doors, rusted trench drain frames and scaling where floors are washed down. In West Palm Beach near Palm Beach International Airport, hangars and aviation service buildings need clean floors that hold up to fuel and hydraulic fluid.
Multi-tenant warehouses of every age line the I-95 and rail corridor from Mangonia Park down through Lake Worth Beach, West Palm Beach and Boynton Beach. Their floors tend to have curled joints, shrinkage cracks built up over decades and patches from past tenants. Distribution buildings built more recently near the turnpike and in Palm Beach Gardens and Jupiter start with better slabs, so owners mostly ask for joint filling, densifying and polishing. In the flex parks of Boca Raton and Delray Beach, food, beverage and pharmaceutical tenants need coved bases and floors sloped to drains.
The work
Industrial concrete floors in Palm Beach County: what the job covers
- 01Placing and finishing new slab-on-grade
- 02Joints filled, repaired or rebuilt
- 03Spall and crack repairs
- 04Grinding, densifying and polishing concrete
- 05Urethane and epoxy coating systems
- 06Ramp, loading dock and equipment pad repairs

Our approach
Keeping the building running
The facility manager and our team map the job by zone and by shift. One area is emptied of product and racking, repaired, allowed to cure and returned before we clear the next one. Where the building cannot shut down during the day, we work nights and weekends. Before anything goes on the schedule, we give the return-to-service time for every material we plan to use.
For joints, our crews saw back the broken edges, rebuild them in repair mortar and fill the full depth with a semi-rigid filler. Replacing a slab section means correcting the subgrade and doweling the new concrete into the panels beside it. Grinders, polishers and prep equipment run with vacuum attachments, which keeps dust off stored product.
SERPE-CO brings more than 20 years in the field to every job. Read about our full industrial floors service or browse all our work in Palm Beach County.
Planning ahead
Floor work while the operation keeps running
Repairing a floor in an existing building is often maintenance with no permit, while new slabs, equipment foundations, trench work and structural changes usually need one. The city or town building department decides which applies, or the county Building Division on unincorporated land. When racking loads, mezzanines or heavy machines are involved, a structural engineer reviews the slab and subgrade and sets thickness, reinforcing and joint layout. Tenants should check the lease first, because many industrial leases require landlord consent before floor alterations.
Moisture and humidity shape the schedule more than rain. A coating put down on a slab with high moisture vapor emission can fail, a real risk here given the high water table, so SERPE-CO tests the slab before a coating is picked. In dock-high buildings, open doors let in humid air that slows curing and can bead up as condensation on a cool slab. Beyond that, work is planned around the operation's busy periods, with night and weekend shifts for areas that have to stay open in daytime.
How we run a job
Site walk first, closed permit last.
- 01
Meet on site
Each job starts on site, walking the property and its conditions with your manager, board or engineer.
- 02
Follow the engineer's scope
The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.
- 03
Put safety first
We can never work too safely: shoring, swing stages, barricades and notices go up first.
- 04
Build the repairs
Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.
- 05
Finish and document
Final inspections, a closed permit and a full record of the work for the association.
Cities served
Industrial Floors throughout Palm Beach County
Summary
What Palm Beach boards and owners should remember
- 01
Riviera Beach floors near the port carry heavy point loads and salt water that tires and boots track in.
- 02
Because the water table is high, Palm Beach County slabs need a moisture vapor emission test before anyone chooses a coating.
- 03
Hangar floors near Palm Beach International Airport usually need coatings able to stand up to fuel and hydraulic fluid.
- 04
Across Palm Beach County, floor repair often counts as maintenance, but new slabs, trench work and equipment foundations usually need a building permit.
Questions
Industrial Floors in Palm Beach: questions we hear
For a Riviera Beach or West Palm Beach warehouse, is polishing or coating the better choice?
Polished concrete works well for dry storage and distribution: hard, easy to clean, with no film to peel. Coatings in epoxy or urethane fit wet processes, chemical exposure and spaces with hygiene rules. Slab moisture, old contamination and the kind of traffic all shape the decision, so we test the slab before recommending either one.
Our Boynton Beach flex building has an older slab. Can it take new racking?
In many cases, yes. We first look at how thick the slab is and what shape it is in, and a structural engineer confirms it can carry the rack loads. From there we repair cracks and joints, patch old anchor holes and trenches, and grind for better flatness. Sections that fall short get replaced.
When can forklifts go back on a repaired floor in Palm Beach County?
Timing comes down to the product. Many joint fillers and rapid-setting mortars take traffic within hours. New slab panels and certain coatings take longer to cure or gain strength. We put each product's return-to-traffic time in writing so operations can schedule around the work.
In Riviera Beach and West Palm Beach warehouses, what makes floor coatings peel or blister?
The common culprits are moisture vapor coming up through the slab, contamination like oil soaked into the concrete, and prep work that did not open the surface enough for a good bond. The fix is to strip off what failed, test the slab for moisture, prep it mechanically and put down a system rated for the reading.
At a food facility in Delray Beach or Boca Raton, can floor work go ahead without stopping production?
Most of the time, yes, with good planning. The floor is split into zones behind dust and odor barriers, work runs nights, weekends or planned shutdowns, and fast-curing materials go in where the process allows. Nearly every job for industrial concrete floors in Palm Beach County is phased like this.
Before repairing or coating the floor, does a tenant in a Jupiter or Boynton Beach warehouse need the landlord to approve?
In most cases. Industrial leases often require written consent for alterations, and a new trench, a replaced slab panel or a coating can all qualify. The lease may also spell out who handles floor repairs and the condition the floor must be in at move-out. Talk to the landlord or property manager before booking the work.
Laws and rules cited
- Palm Beach County Building Division: mandatory milestone inspections
- City of Boca Raton: Building Recertification Inspection Program
- Florida Statute 553.899: mandatory structural inspections for condominium and cooperative buildings
- Florida Statute 718.112: structural integrity reserve studies
Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.
Working with an engineer?
Holding drawings, specifications or a complete set of bid documents?
Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.
Request an estimate
Let's plan your restoration.
Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.
- More than 20 years in the field
- St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
- Family-owned Certified General Contractor
Rather call?(954) 718-3094