(954) 718-3094 Request an estimate

Palm Beach County, Florida

Concrete Restoration in Boynton Beach

SERPE-CO is the repair contractor for Boynton Beach owners with catwalk buildings, Intracoastal condominiums, warehouse floors and parking garages, building each fix to the engineer's plan.

In short

Who repairs concrete in Boynton Beach?

SERPE-CO handles concrete restoration in Boynton Beach for condo boards, co-ops and commercial owners. Typical jobs mean fixing spalled catwalks, slabs, balconies and columns, swapping rusted rebar, restoring garages and laying new waterproofing. Because the city has its own 25-year recertification program, much of the work starts from a structural report written by a licensed engineer or architect.

Free milestone planner

Is a milestone inspection coming due on your building?

Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.

Building type

Add the year and story count for an estimated due date.

About this estimate

This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.

Boynton Beach

For a lot of owners, concrete restoration in Boynton Beach now comes on a calendar, since the city runs a recertification program of its own on top of state law. Boynton Beach mixes waterfront condominiums along Federal Highway and the Intracoastal Waterway, big inland communities built for retirees, and plenty of warehouses and commercial buildings. SERPE-CO brings more than 20 years in the field to these properties and builds structural repairs exactly as the engineer specifies.

Geography sets Boynton Beach apart from the towns around it, because nearly the whole city sits on the mainland. Most of the barrier island across the water is Ocean Ridge, so the city faces the Lake Worth Lagoon and the Intracoastal Waterway from the west shore. Local buildings deal with brackish water and a constant sea breeze instead of open surf. Below, our team walks through where the buildings stand, how they break down and what the city program asks for.

Brett Serpe, MBA, GC, CEO of SERPE-CO

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974

Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.

Concrete Restoration in Boynton Beach by SERPE-CO

Summary

Boynton Beach: quick facts

  • 01

    Qualifying buildings inside Boynton Beach city limits are recertified at 25 years, then again every 10 years.

  • 02

    The Boynton Beach recertification program reviews both electrical and structural systems.

  • 03

    Nearly all of Boynton Beach is on the mainland, facing the Lake Worth Lagoon and the Intracoastal Waterway.

  • 04

    Under the Boynton Beach program, improved balconies and guardrails are reviewed in the phase one inspection.

  • 05

    Quantum Park on Gateway Boulevard is the largest Boynton Beach cluster of office, distribution and industrial buildings.

Local building stock

Where Boynton Beach buildings stand

Downtown Boynton Beach, around Federal Highway and Ocean Avenue near the Boynton Harbor Marina, holds the tallest buildings in the city. Federal Highway follows the shoreline just a little way inland. During the 2000s this waterfront picked up mid-rise and high-rise residential buildings with parking garages attached. Along Federal Highway to the north and south, condominiums from the 1960s and 1970s face the Intracoastal Waterway, and many of them have seawalls, docks and open exterior walkways.

Away from the water, Boynton Beach grew around retirement communities that started going up in the 1960s and kept coming for decades. Communities along Woolbright Road, Congress Avenue and Boynton Beach Boulevard are filled with clusters of two- to four-story condominium buildings reached by catwalks and open stairs, with a clubhouse and commercial pool in each. Construction is concrete frame or stuccoed masonry, and the three- and four-story buildings are covered by the city recertification program.

Compared with most coastal neighbors, Boynton Beach has a large share of industrial and flex space. Quantum Park, on Gateway Boulevard west of Interstate 95, mixes distribution, office and light manufacturing buildings, while older warehouse blocks follow the interstate and the railroad. Medical offices and shopping centers gather along Congress Avenue. Every one of these properties has slabs on grade, docks, tilt-wall panels and parking lots or decks that wear out and need repair over time.

Have a question about your building?Call the office or send a quick request. A real person answers.

Common failures and causes

How Boynton Beach concrete breaks down

In Boynton Beach, a big share of the repair work happens on catwalk buildings. Builders often poured those walkways dead flat or tilted toward the wall, so rainwater collects at the slab edge and against the stucco. Steel near the edge rusts, the edge cracks and pops off, and the railing posts set into the slab work loose. Columns under the walkways and the stair landings show the same pattern, and Intracoastal buildings wear out quicker on the side facing the water because of the salt.

Downtown Boynton Beach residential garages are now old enough that joints and coatings are due. When expansion joint seals fail, water drips on parked cars and soaks into the beams underneath. Warehouse floors in the commerce parks get spalled joints from forklift traffic, along with cracked panels and worn wearing surfaces. Out at the inland communities, pool decks crack and settle, and years of sun and pool chemicals open up the coping and the expansion joints.

Services

Concrete Restoration in Boynton Beach: our scope of services

Concrete Restoration

Our Boynton Beach structural repair work runs from walkway slabs, columns, beams and stairs on residential buildings to dock edges and wall panels on commercial ones. SERPE-CO cuts out bad concrete back to sound material, restores the rebar, rebuilds the section and finishes with the sealer or coating the engineer calls for. On occupied buildings, shoring and pedestrian protection go up before any demolition begins.

Milestone & Recertification

Structural reports under the Boynton Beach 25-year recertification program spell out each deficiency and when it has to be fixed. SERPE-CO works off that report and the engineer's repair drawings, puts together the city permit application, does the repairs and hands over the records the engineer uses to certify the job. SERPE-CO is the contractor doing the repairs, not the firm that inspects the building or writes the report.

Balconies & Railings

The Boynton Beach program has balconies and guardrails reviewed in phase one, so problems at railings and slab edges show up in a lot of reports. SERPE-CO rebuilds balcony and walkway edges, fixes the drainage, waterproofs the deck and sets new aluminum railings with posts anchored the right way. Our crews stage catwalk work so every unit always has a clear path to a stairway.

Industrial Floors

Distribution and warehouse buildings along the Interstate 95 corridor and in Quantum Park in Boynton Beach need floors that hold up under forklifts and loaded racks. SERPE-CO repairs cracks and spalled joints, replaces slab panels that have failed, grinds down and levels uneven spots, and applies densifiers, sealers or coatings. Work goes zone by zone so the rest of the building can keep operating.

Parking Garages & Plaza Decks

Garages behind the Boynton Beach residential buildings close to Federal Highway and Ocean Avenue need joint, coating and concrete upkeep with age. SERPE-CO repairs columns, beams and slabs, puts in new expansion joint seals, fixes drainage and applies traffic coatings so the deck stays dry. Levels close one at a time so residents can still park.

Commercial Roofing

The Boynton Beach retirement communities on Woolbright Road, Congress Avenue and Boynton Beach Boulevard have many flat-roofed buildings two to four stories tall, often reroofed in phases under a single consultant's specification. Off Gateway Boulevard, Quantum Park adds office and distribution roofs. Each system carries Florida Product Approval, the city permits the reroof, and any spalled deck concrete gets repaired during tear-off.

Browse all our work in Palm Beach County, or view the complete list of our services.

Inspections and permits

How recertification works in Boynton Beach

Boynton Beach runs its own recertification program, which the city says is patterned after the Miami-Dade County program that has been in place for many years. Every qualifying building inside city limits must be recertified at 25 years, then once every 10 years. Qualifying buildings are condominium and cooperative residential buildings of three stories or more, plus threshold buildings, defined as more than three stories or 50 feet tall or having large assembly occupancies.

The Boynton Beach program looks at both the structural and electrical systems. According to the city, improved balconies and guardrails get inspected in phase one, so the condition of walkways and railings becomes an official part of the report. Homes with one to three families, townhomes of no more than three habitable stories, schools and government buildings are exempt. Licensed design professionals do the inspections, repairs require a city permit, and the building official sets the date for each property.

Around Boynton Beach

Neighborhoods and corridors we cover

  • Downtown Boynton Beach and Ocean Avenue
  • Boynton Harbor Marina
  • Federal Highway corridor
  • Congress Avenue corridor
  • Quantum Park
  • Gateway Boulevard
  • Woolbright Road
  • Boynton Beach Boulevard
  • Leisureville
Ready for a site visit?Tell us where the building is and what you are seeing. We will set up a time to walk it.

How we run a job

From the first site visit to a closed permit.

  1. 01

    Meet on site

    Each job starts on site, walking the property and its conditions with your manager, board or engineer.

  2. 02

    Follow the engineer's scope

    The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.

  3. 03

    Put safety first

    We can never work too safely: shoring, swing stages, barricades and notices go up first.

  4. 04

    Build the repairs

    Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.

  5. 05

    Finish and document

    Final inspections, a closed permit and a full record of the work for the association.

Questions

Questions we hear in Boynton Beach

What Boynton Beach buildings fall under recertification?

Boynton Beach covers condominium and cooperative residential buildings of three stories or more, along with threshold buildings, meaning more than three stories or 50 feet tall or with large assembly occupancies. Those buildings are recertified at 25 years and then every 10 years. Government buildings, schools, low townhomes and small residential buildings are exempt. Each case is confirmed by the building official.

After a recertification report in Boynton Beach, who does the repair work?

The association or owner brings in a contractor to build what the engineer has specified. SERPE-CO does concrete restoration in Boynton Beach, covering structural repair, balcony and walkway work, new railings, garage repair and waterproofing. In most cases the engineer behind the report reviews the work as it moves along and confirms to the city that it is complete.

What makes catwalk edges crack in older Boynton Beach communities?

Many walkways in the older Boynton Beach communities were poured with almost no slope, so water sits along the slab edge and soaks in. The rebar nearest the edge rusts before anything else, swells and splits the concrete in a line running along the edge. The fix is to remove that concrete, restore the steel, rebuild the edge and waterproof the walkway.

Does Boynton Beach sit on the ocean?

For the most part, no. Boynton Beach is on the mainland side of the Lake Worth Lagoon and the Intracoastal Waterway, and most of the barrier island across from it belongs to the Town of Ocean Ridge. Boynton Beach waterfront buildings still get brackish water and salty breeze that rust reinforcing steel, though usually at a slower pace than buildings facing the open ocean.

Will a Boynton Beach warehouse have to close for floor repairs?

In most cases, no. Our crews split the floor into zones and work around shifts, using fast-setting materials when a dock door or aisle needs to open again quickly. SERPE-CO first walks the building with the operator, marks every crack, joint and panel to be fixed, and settles on a sequence that keeps shipping, receiving and storage moving.

Laws and rules cited

Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.

Working with an engineer?

Holding drawings, specifications or a complete set of bid documents?

Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.

Request an estimate

Let's plan your restoration.

Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.

  • More than 20 years in the field
  • St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
  • Family-owned Certified General Contractor

Rather call?(954) 718-3094

Work needed (choose all that apply)
Call Request an estimate