Broward County, Florida
Stucco Repair and Painting in Broward County
Repair the wall first, then apply a paint system that keeps water out.
In short
Who handles stucco repair and painting in Broward?
SERPE-CO handles stucco repair and painting in Broward County for condo associations, hotels, shopping centers and commercial buildings. We pressure clean, sound the walls, cut out and replace loose stucco, fix cracks, renew the sealant at windows and joints, then apply a primer and finish system made for coastal sun, salt and rain.
Free milestone planner
Is a milestone inspection coming due on your building?
Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.
Add the year and story count for an estimated due date.
Want a second look at your timeline? Send your building details and SERPE-CO will follow up about the inspection, likely repairs and how to plan for them.
About this estimate
This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.
Stucco & Painting · Broward
With stucco repair and painting in Broward County, the order matters: repairs first, paint last. SERPE-CO sounds the facade, removes stucco that has come loose, fixes cracks and the concrete or block behind them, and renews the sealant around openings and joints before any coating goes on. The finish system is chosen for coastal exposure. Paint is the building's waterproofing layer, and it only performs while the wall underneath stays dry and solid.
We paint and repair low-rise, mid-rise and high-rise condominiums, hotels and commercial buildings. Facade work usually runs alongside concrete repair, since bulging or rust-stained stucco is often the first sign of corroding steel behind it. Opening those spots during the paint job keeps us from coating over damage that would return in a few years. With Benjamin Moore and Sherwin-Williams, we give boards color overlays of their own building.

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974
Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.


Local conditions
How Broward sun, salt and rain wear down a facade
Hard sun, salt and wind-driven rain wear out exterior paint quickly here. South and west walls chalk and fade first. On the ocean side of buildings in Pompano Beach, Lauderdale-by-the-Sea and Fort Lauderdale, salt collects on the paint, and hairline cracks flex with each day's heat until water gets behind the coating. On the coast, plan on repainting roughly every 7 to 10 years.
Communities inland in Pembroke Pines, Coral Springs, Tamarac, Sunrise and Plantation wear differently. Big associations with rows of matching buildings tend to crack at floor lines and around openings, stain below windows and lose stucco on walkway and stair walls. Each repair is simpler than on a beachfront tower, but there are many of them, and phasing matters to the people living there.
Buildings that need this work
Broward facades we repair and repaint
A big share of Broward exterior work is commercial. Shopping centers on State Road 7, University Drive and Federal Highway run long stretches of stucco parapet, sign band and canopy that crack at the control joints and streak where water spills off the top of the wall. Tilt-up concrete warehouses near Port Everglades, in Deerfield Beach and here in Pompano Beach are painted panels with sealant joints in between, and those joints tend to fail before the paint, letting water in at every panel edge.
On residential buildings in Broward, the facade depends on height. Oceanfront towers combine painted concrete with stucco over block infill, and they crack along floor lines and bulge where slab edges are rusting. Beachfront hotels in Hollywood and Fort Lauderdale repaint more often, since their look is part of what they sell. Inland, the typical building is two to four stories of stucco over block with exterior stair towers and catwalk ceilings, and peeling usually starts at soffits and at the bottom of walls hit by sprinklers.
The work
Stucco repair and painting in Broward County: what the job covers
- 01Stucco sounding, removal and new application
- 02Cracks routed, sealed and patched
- 03Surface prep and pressure washing
- 04High-build and elastomeric exterior paints
- 05New sealant at joints, windows and doors
- 06Swing stage, scaffolding or lift access

Our approach
Our facade process on a property people live in
First the walls are pressure cleaned, sounded and marked so repair quantities are agreed before work starts. Loose stucco comes off to a sound edge and goes back on in the right number of coats, each allowed to cure. Each crack is routed and sealed or patched based on width and movement. Old sealant joints are cut out completely and replaced, never skimmed.
SERPE-CO applies coatings as a full system: a primer or sealer chosen for the substrate, then an elastomeric or high-build topcoat applied to the thickness in the specification. On towers our swing stages work a single drop at a time, and residents hear from us before work reaches their windows and balconies. At multi-building communities each building is finished before the crew moves on, so owners see completed work and parking changes are brief.
SERPE-CO brings more than 20 years in the field to every job. Read about our full stucco & painting service or browse all our work in Broward County.
Planning ahead
How a Broward association should plan a repaint
A Broward facade job should start with a written specification rather than a color fan. That document spells out how the walls are cleaned, how stucco and cracks are repaired, which sealant and primer go on, which finish product is used and at what film thickness, so every bidder prices identical work. Any structural problem that sounding turns up is referred to the association's engineer and repaired under a city building permit. The city's building official also says whether the stucco and coating scope needs a separate permit there.
Residents get involved in two decisions: color and timing. SERPE-CO works with leading paint suppliers to produce color overlays of the building, and Broward boards confirm the pick with large sample areas on the walls. Paint will not take on a damp wall and needs a few dry hours to set, so the work goes quicker in the dry months, though large communities paint year-round between storms. Exterior painting is a required component of the state structural integrity reserve study, which helps associations fund a repaint before the coating fails.
How we run a job
Site walk first, closed permit last.
- 01
Meet on site
Each job starts on site, walking the property and its conditions with your manager, board or engineer.
- 02
Follow the engineer's scope
The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.
- 03
Put safety first
We can never work too safely: shoring, swing stages, barricades and notices go up first.
- 04
Build the repairs
Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.
- 05
Finish and document
Final inspections, a closed permit and a full record of the work for the association.
Cities served
Stucco & Painting throughout Broward County
Summary
What Broward boards and owners should remember
- 01
Tilt-up warehouses in Deerfield Beach and Pompano Beach typically need fresh panel joint sealant before a repaint.
- 02
Along Broward's commercial corridors, shopping center parapets and canopies crack at control joints and streak where water spills over the wall.
- 03
A written spec naming the repairs, sealant, primer, finish and film thickness puts every Broward bid on an even footing.
- 04
Exterior painting is a listed item in Florida's reserve study, so Broward condo boards can fund repaints on schedule.
Questions
Stucco & Painting in Broward: questions we hear
How often does a Broward County condominium need repainting?
On the coast, about every 7 to 10 years, though exposure, the last system and the sealants all shift that. Powdery chalk on your fingers, flaking paint, cracks you can see into and dark streaks under windows mean the paint has stopped doing its job and someone should take a look at the building.
What is an elastomeric coating, and should our Pompano Beach building use one?
An elastomeric coating is a heavy, flexible exterior finish that stretches over hairline cracks and holds up against wind-driven rain. The product suits concrete and stucco walls with fine cracking and hard weather. Apply it only over a sound, dry, primed surface, or trapped moisture will cause blisters.
Will stucco repairs at our Plantation or Sunrise community need an engineer?
Usually not for cosmetic stucco and crack repairs. If sounding turns up spalled concrete, exposed or rusted steel, or cracks that point to structural movement, an engineer should review those spots and specify the fix. We flag each location as soon as we find it so nobody paints over it.
Is it possible to paint a Broward County commercial building in the rainy season?
Yes, with the right plan. Crews begin at first light, wrap up before the afternoon storms and never coat a wet wall. From mid-May to mid-October, stucco repair and painting in Broward County moves slower than it does in winter, yet plenty of large communities and commercial properties keep working through summer on a schedule that builds in lost days.
What makes tilt-up warehouse walls in Pompano Beach different from stucco?
A tilt-up wall is a solid concrete panel with sealant joints on each side and little or no stucco on it. The scope is replacing joints, repairing cracks, patching spalls at panel edges and applying a coating made for bare concrete. Failed joints are usually how water gets inside, so we replace them before any paint goes on.
How can a Hollywood condo board pick colors that hold up?
Start from the color overlays we prepare with the paint supplier, then view large mockups on a sunny wall in morning and late-day light. Rich, dark colors wash out sooner under South Florida sun than pale ones. The coating maker knows which colors hold up in its product, and your city can say whether local rules limit color.
Laws and rules cited
- Broward County Board of Rules and Appeals Policy 05-05: Building Safety Inspection Program
- Florida Statute 553.899: mandatory structural inspections for condominium and cooperative buildings
- Florida Statute 718.112: structural integrity reserve studies
Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.
Working with an engineer?
Holding drawings, specifications or a complete set of bid documents?
Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.
Request an estimate
Let's plan your restoration.
Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.
- More than 20 years in the field
- St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
- Family-owned Certified General Contractor
Rather call?(954) 718-3094