(954) 718-3094 Request an estimate

Broward County, Florida

Commercial Roofing in Broward County

Low-slope roofs repaired, recoated or replaced per the consultant's spec, once the deck below is sound.

In short

Who handles commercial roofing in Broward?

SERPE-CO is a Certified General Contractor with more than 20 years in the field, and we carry out commercial roofing in Broward County for condo associations, property managers and commercial owners. Our crews repair and replace low-slope roof systems, apply restoration coatings, fix drainage with tapered insulation and repair the concrete deck, curbs and parapets underneath, following the specification from the roof consultant or engineer and the High-Velocity Hurricane Zone provisions.

Free milestone planner

Is a milestone inspection coming due on your building?

Enter the year your building got its certificate of occupancy and how many stories it has. The planner estimates your deadline under Florida law, then you can send it to SERPE-CO for a second look.

Building type

Add the year and story count for an estimated due date.

About this estimate

This is a planning estimate drawn from the statewide rule in Florida Statute 553.899. Your local building department sets the real deadline and may call for the first inspection at 25 years instead. Broward County also has its own Building Safety Inspection Program. Check your date with your building official and engineer, or contact SERPE-CO and we will help you sort it out.

Commercial Roofing · Broward

Commercial roofing in Broward County means the flat and low-slope roofs over condominium high-rises, garden-style communities, offices, retail centers and warehouses. SERPE-CO fixes leaks at drains, flashings and penetrations, puts restoration coatings on membranes that are still in good shape, and tears off failed roofs to install modified bitumen, single-ply or built-up systems. Since most of these buildings are concrete, we repair the deck, parapets and equipment curbs below as well, so the new roof sits on solid structure.

Most roofing jobs we take on begin with documents someone else prepared. A roofing consultant, a structural engineer or the property's own engineer surveys the roof, makes test cuts and writes the plans, specs and bid documents, then the owner or board has contractors price that same scope. SERPE-CO bids those documents, sends product approvals and shop drawings in for review and builds what the design calls for. If a board reaches us first, we document the roof and suggest hiring a consultant before anyone prices a big replacement.

Brett Serpe, MBA, GC, CEO of SERPE-CO

Reviewed by Brett Serpe, MBA, GC, CEO of SERPE-CO · Florida Certified General Contractor CGC #1523974

Prepared by the SERPE-CO project team, with more than 20 years in concrete restoration. Last reviewed November 2026.

Commercial roofing in Broward County by SERPE-CO
Broward County coastal condominium buildings

Local conditions

How the High-Velocity Hurricane Zone shapes roofing in Broward

Only two Florida counties sit in the code's High-Velocity Hurricane Zone: Broward and Miami-Dade. Roofs in Broward fall under the HVHZ roofing provisions when permitted, and each roofing product needs an approval for use in that zone, usually a Notice of Acceptance issued by Miami-Dade County. The permit is filed on the HVHZ uniform roofing application. For a low-slope roof that package includes approval pages for the specific system being installed, wind design calculations and, when reroofing, an owner's notification form.

Weather adds to what the code requires. On the Galt Ocean Mile and the A1A corridor through Hallandale Beach, Hollywood, Lauderdale-by-the-Sea and Pompano Beach, tower roofs crowded with elevator penthouses, fans and cooling towers take constant wind and salt. Metal coping, flashings and equipment stands rust first, and once water slips past them it reaches the concrete deck and parapet walls. Farther inland, flat roofs at 55-plus communities in Sunrise, Margate and Tamarac and the warehouses near Port Everglades tend to fail from ponding and old seams.

Buildings that need this work

The roofs we work on across Broward

Roofs on the oceanfront high-rises of the Hillsboro Mile, the Galt Ocean Mile and the Hallandale Beach and Hollywood shoreline are small and crowded. Cooling towers, elevator machine rooms, generator platforms and window-washing davits all pass through a membrane many floors up, and leaks tend to begin at equipment curbs, pitch pans and the parapet coping. Every load of material and debris on these Broward jobs moves by crane or building hoist, and that logistics plan drives the schedule more than the size of the roof.

Most of Broward's roof area is inland. The 55-plus communities of Deerfield Beach, Coconut Creek, Margate, Lauderhill and Tamarac are made up of many flat or low-slope buildings three and four stories tall, often reroofed one building at a time. Retail centers on State Road 7 and University Drive stretch out under long roofs broken up by parapets, storefront canopies and one rooftop unit per tenant. Industrial bays near Port Everglades, in Oakland Park and here in Pompano Beach have wide roofs where seam condition and drainage decide how long the roof will last.

Have a question about your building?Call the office or send a quick request. A real person answers.

The work

Commercial roofing in Broward County: what the job covers

  1. 01Test cuts and leak tracing for the roof consultant
  2. 02Targeted repairs at drains, scuppers, flashings and penetrations
  3. 03Full tear-off and new modified bitumen, TPO, PVC or built-up roofs
  4. 04Coatings that restore sound existing membranes
  5. 05Crickets, tapered insulation and improved drainage
  6. 06Roof deck spall repair and rebuilt parapets, coping and curbs
Commercial Roofing work underway in Broward County

Our approach

Reroofing occupied Broward buildings

When people live or work under the roof, the job comes down to sequence. SERPE-CO splits the roof into pieces small enough to open and dry in the same day, so nothing sits open overnight. Material is lifted on scheduled crane or hoist days, with the landing area fenced and entrances covered. Licensed mechanical trades disconnect and reset rooftop units on our schedule, and residents and tenants get written notice ahead of any day that touches parking, deliveries or noise.

Tearing off the old roof shows what the deck looks like. On concrete buildings our crew sounds the deck and parapets, marks cracks and spalls for the engineer and fixes them the way we fix garages and balconies, all before insulation is installed. Tapered insulation and crickets follow the consultant's layout so water gets to the drains, and flashing at every drain, curb and parapet matches the approved details. The consultant watches the work, and the city inspects before the permit is closed.

SERPE-CO brings more than 20 years in the field to every job. Read about our full commercial roofing service or browse all our work in Broward County.

Planning ahead

What Broward boards and owners settle before a reroof

Reroof permits in Broward come from the city building department or, in unincorporated Broward and the cities that contract with the county, from its Building Code Division. Under the Florida Building Code, once repairs in a 12-month period exceed 25 percent of a roof or a roof section, the whole section must meet current code, though a 2022 state law exempts any roof built, repaired or replaced to the 2007 edition or a newer one. The consultant can say which rule governs before the board decides.

Rooftop equipment gets a plan of its own. Under a countywide Board of Rules and Appeals policy, every HVHZ reroof permit carries an affidavit that lists the conduits, gas vents, solar panels and air conditioning units sitting on the roof, and anything removed during the job is reinstalled under whatever code was in force on the date the reroof permit was issued. Weather handles the rest: opening a roof is easier outside the rainy season from mid-May to mid-October, and under Broward's code, loose materials must be tied down once a hurricane watch is posted.

How we run a job

Site walk first, closed permit last.

  1. 01

    Meet on site

    Each job starts on site, walking the property and its conditions with your manager, board or engineer.

  2. 02

    Follow the engineer's scope

    The engineer writes the scope. We price it line by line, plan access and lay out each phase to build it.

  3. 03

    Put safety first

    We can never work too safely: shoring, swing stages, barricades and notices go up first.

  4. 04

    Build the repairs

    Crews work through the repairs in order, stopping for inspections wherever the engineer calls for them.

  5. 05

    Finish and document

    Final inspections, a closed permit and a full record of the work for the association.

Ready for a site visit?Tell us where the building is and what you are seeing. We will set up a time to walk it.

Summary

What Broward boards and owners should remember

  • 01

    Because Broward sits in the High-Velocity Hurricane Zone, each roofing product must be approved for HVHZ use, most often through a Miami-Dade Notice of Acceptance.

  • 02

    On oceanfront Broward towers, leaks usually start at pitch pans, equipment curbs and parapet coping, where salt eats metal flashing first.

  • 03

    Roofs put on under the 2007 Florida Building Code or a newer edition do not trigger the whole-section upgrade in the 25 percent rule.

  • 04

    Broward HVHZ reroof permits carry a countywide rooftop equipment affidavit, so each unit, vent and conduit is planned before tear-off.

Questions

Commercial Roofing in Broward: questions we hear

Does a roof in Fort Lauderdale need products carrying Miami-Dade approval?

Yes. Because Broward County sits in the High-Velocity Hurricane Zone, any roofing product installed here has to be approved for use in the zone. For most systems that means an up-to-date Notice of Acceptance from Miami-Dade County covering the roof system and its parts. Those approval pages go in with the permit application, and the installation has to follow what the approval describes.

How does the 25 percent reroofing rule work in Broward?

Under the Florida Building Code, repairing, replacing or recovering more than a quarter of a roof, or of a roof section, inside any 12-month window means that whole roof or section must meet the current code. Since 2022, state law carves out roofs installed or reworked under the 2007 edition or any newer one; for those, only the portion under repair has to meet today's code. Your building official applies the rule.

Can a coating stand in for a reroof on our Pompano Beach condominium?

In some cases. A coating can add years to a membrane that is still bonded and sitting on insulation that is mostly dry. When a moisture survey or test cuts find wet insulation over large areas, coating on top seals the water in and the roof keeps breaking down from underneath. The consultant's survey determines which sections qualify, and the coating must carry the product approval the building department requires.

Who prepares the reroof specification for a condominium building in Hollywood or Hallandale Beach?

The association hires a roof consultant, architect or engineer for that. The consultant surveys the roof, takes test cuts or runs a moisture scan, chooses a system approved for HVHZ use and puts together the drawings and bid package. Every contractor then prices the same documents, and the consultant watches over the installation. SERPE-CO's role is building to those documents.

Do roof leak repairs in Broward County need a permit?

Reroofing and most roof repairs need a city roofing permit, submitted with the HVHZ uniform roofing application that lists each approved product. The building official decides whether a very small repair needs one. On commercial roofing in Broward County, SERPE-CO checks with the city on the right permit and files it before any work begins.

What happens to the rooftop equipment during a reroof in Tamarac or Sunrise?

Broward requires an affidavit with the reroof permit naming every solar array, conduit, vent and unit on the roof. Units are disconnected and moved aside or lifted, the new roof goes in under them, and licensed trades set and reconnect the equipment. Where a unit has no code-approved curb or stand, a mechanical permit covers the new one.

Laws and rules cited

Treat this page as general information only, not legal or engineering advice. Licensed engineers and architects perform the inspections, and the building official decides which dates apply to your property. SERPE-CO's role is to carry out the repairs.

Working with an engineer?

Holding drawings, specifications or a complete set of bid documents?

Structural engineers, property engineers and board members send SERPE-CO much of our restoration, pool and roofing work. Once a scope has been drawn and specified, our team prices what the documents show, raises questions where something is unclear, and lays out each line so boards can weigh the bids on equal terms.

Request an estimate

Let's plan your restoration.

Tell us where the building is and what you are seeing. We set up a visit to the property, then send a written proposal, or tell you an engineer needs to write the scope first.

  • More than 20 years in the field
  • St. Lucie, Martin, Palm Beach, Broward and Miami-Dade
  • Family-owned Certified General Contractor

Rather call?(954) 718-3094

Work needed (choose all that apply)
Call Request an estimate